one4house |
Thu Jan 23, 2014 11:35 am |
|
Rear wheels inner 113501283 A
Rear wheels outer
replaced by
113501277 B
Are these the two bearings I need on either side? I have quite the grinding noise on the passenger side when I make left turns. I think it is time for a new set of rear bearings. |
|
one4house |
Thu Jan 23, 2014 11:42 am |
|
If I go by Advance Auto, they give me a National 206 and National 306 for a cross on those. Is this correct? Just looking for some input from those who have done it before. |
|
Bobnotch |
Thu Jan 23, 2014 12:02 pm |
|
one4house wrote: If I go by Advance Auto, they give me a National 206 and National 306 for a cross on those. Is this correct? Just looking for some input from those who have done it before.
Don't know about the cross over numbers, but the inner bearing number is 113 501 283, and the outer bearing number is 113 501 277A. |
|
W1K1 |
Thu Jan 23, 2014 12:37 pm |
|
6206-2rs/c3 ball bearing, and a NU306ECP cylindrical roller bearing from SKF, FAG, NTN, NSK, etc
Any local industrial bearing supplier should have them available, and be able to cross the numbers for you.
Just don't buy the cheap chinese crap in the white boxes.
Don't forget to change the seals, and change the grease too. |
|
one4house |
Mon Jan 27, 2014 7:32 am |
|
Is BECK/ARNLEY a trusted brand? |
|
W1K1 |
Mon Jan 27, 2014 7:41 am |
|
No, that would probably be reboxed import quality |
|
one4house |
Mon Jan 27, 2014 7:56 am |
|
Are Airhead Parts products any good? They have minimal information about what they are selling. |
|
GjMan |
Mon Jan 27, 2014 8:33 am |
|
I believe CIP offers a choice between basic quality and higher quality wheel bearings. Choose wisely. |
|
one4house |
Mon Jan 27, 2014 8:50 am |
|
GjMan wrote: I believe CIP offers a choice between basic quality and higher quality wheel bearings. Choose wisely.
Thanks for that tip. CIP is $18 cheaper, total, than Rock Auto. Rock Auto was SKF. CIP says "OE Quality. Not China"
I think I will go that way.
VWC-113-501-283-GR - OE QUALITY INNER STUB AXLE BRG IRS - BEETLE 69-79 / GHIA 69-74 / TYPE 3 69-74 / THING 73-74 (NOT MADE IN CHINA)
VWC-113-501-277-AGR - OE QUALITY OUTER AXLE BRG IRS - BEETLE 69-79 / GHIA 69-74 / TYPE 3 69-74 / THING 73-74 (NOT MADE IN CHINA) |
|
Bobnotch |
Mon Jan 27, 2014 9:31 am |
|
one4house wrote: Are Airhead Parts products any good? They have minimal information about what they are selling.
Yes, most of their products are good. If you have a question about a part, call their toll free phone number. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|