Chino_UK |
Sun Jun 29, 2014 2:18 pm |
|
Hey everyone, noticed today my fuel pump is seeing fuel from the top. Then looking more into it, the setup doesn't look quite right? My car is a twin carb setup, pic below. Looks like it only has one outlet hooked up?
Hard to see but there looks to be a bolt in one outlet. Anyone tell me if this is right? And what am I best doing, getting a new pump and replumbing it all?
Btw I took this pic when tightening my loose fan pulley up, hence it's sat funny :) |
|
KTPhil |
Sun Jun 29, 2014 2:33 pm |
|
The brass bolt head is a plug that holds a filter screen.
There is only one pump outlet, that then branches to two lines with a tee adapter. |
|
Chino_UK |
Sun Jun 29, 2014 2:46 pm |
|
KTPhil wrote: The brass bolt head is a plug that holds a filter screen.
There is only one pump outlet, that then branches to two lines with a tee adapter.
Ahh thanks for that, I was wondering :)
So... Reckon I can find a gasket for the top section to fix the leaking? |
|
Bobnotch |
Mon Jun 30, 2014 7:14 am |
|
Chino_UK wrote: KTPhil wrote: The brass bolt head is a plug that holds a filter screen.
There is only one pump outlet, that then branches to two lines with a tee adapter.
Ahh thanks for that, I was wondering :)
So... Reckon I can find a gasket for the top section to fix the leaking?
You'll probably have to get a fuel pump rebuild kit, to get that gasket. If the pump otherwise works, I'd just change that gasket, otherwise you could end up with a non-functioning pump. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|