| deterbruder |
Mon Feb 16, 2004 7:41 pm |
|
when i took out the air conditioner hoses and wiring this weekend somehow i unplugged the sink pump wire also. should this wire have an in line fuse with about six inches or so of extra wire on the end. and which fuse pin does it belong on?
also, what is the recomended way of plugging the gaping holes that are now left in floor from the hoses. i am throwing away the hoses so if anyone wants them, they are here for the taking.
thanks
matthew |
|
| ratwell |
Mon Feb 16, 2004 8:04 pm |
|
| On your pump there should be a bussman fuse in a holder clipped to the back of the pump. The wire goes to the switch by the faucet. |
|
| deterbruder |
Mon Feb 16, 2004 8:15 pm |
|
sorry ratwell, i didnt do a very good job of descibing this. i unplugged it at the fusebox. i was intending to just take out a wire with a relay looking box, that was part of the air conditioning unit and was plugged into the back of the fuse box. but i also managed to pull out the sink pump wire from the back of the fuse box and this sink pump wire that was left seems too short, so i am pretty sure that the extra six inch wire with inline fuse is what it needs to connect to the fuse box.
just not sure where...
thanks
matthew |
|
| ratwell |
Tue Feb 17, 2004 12:19 am |
|
| Yes, I misunderstood. There is a section of wire for a fuse holder and below is a 16A fuse label as a clue which probably fell off long ago. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|