Narrow minded rail |
Sat Feb 27, 2016 6:42 am |
|
Just wondering what everybody uses to hold the wires and wire loom on their cars and rail buggy. I love to see wires and loom run really neat and tied down.
I work for a cat dealer and on the tractors they use a piece of chain with a slight bend in it and a small weld on each end and it looks really cool and works well. Just wanted to see what others use please . |
|
Dale M. |
Sat Feb 27, 2016 8:13 am |
|
Take your pick....
http://www.delcity.net/store/Loom-&-Loom-Clamps/
http://www.delcity.net/store/Wire-Cable-Clamps/p_800911
http://www.delcity.net/store/Cable-Ties-&-Wire-Fasteners/
Dale |
|
Narrow minded rail |
Sat Feb 27, 2016 8:52 am |
|
Thanks for the reply but I really don't want to drill holes in my tubes. There has got to be something that works |
|
Sandjunky |
Sat Feb 27, 2016 5:46 pm |
|
Dale M. wrote: Take your pick....
http://www.delcity.net/store/Loom-&-Loom-Clamps/
http://www.delcity.net/store/Wire-Cable-Clamps/p_800911
http://www.delcity.net/store/Cable-Ties-&-Wire-Fasteners/
Dale
Nice. I hadn't heard of delcity. I usually use Mcmaster-Carr.
Narrow minded rail wrote: Thanks for the reply but I really don't want to drill holes in my tubes. There has got to be something that works
I use loom clamps on the floor pan and wire ties on tubing. |
|
cbeck |
Sat Feb 27, 2016 6:28 pm |
|
Might I suggest welding on a piece of chain :lol: |
|
Dale M. |
Sat Feb 27, 2016 11:30 pm |
|
Sandjunky wrote: Dale M. wrote: Take your pick....
http://www.delcity.net/store/Loom-&-Loom-Clamps/
http://www.delcity.net/store/Wire-Cable-Clamps/p_800911
http://www.delcity.net/store/Cable-Ties-&-Wire-Fasteners/
Dale
Nice. I hadn't heard of delcity. I usually use Mcmaster-Carr.
Narrow minded rail wrote: Thanks for the reply but I really don't want to drill holes in my tubes. There has got to be something that works
I use loom clamps on the floor pan and wire ties on tubing.
Another source is Waytek Wire...
http://waytekwire.com
Dale |
|
Mal evolent |
Sun Feb 28, 2016 5:55 am |
|
Quote: Thanks for the reply but I really don't want to drill holes in my tubes.
weld nut to frame. use short screw
clamp around frame. bolt wire clamp to frame clamp |
|
PhillipM |
Sun Feb 28, 2016 11:41 am |
|
Rubber lined P-clips.
I avoid plastic cable ties, have chafing issues with 'em. |
|
Sandjunky |
Mon Feb 29, 2016 2:25 pm |
|
Dale M. wrote:
Another source is Waytek Wire...
http://waytekwire.com
Dale
Saved for future reference. Thanks! |
|
Powered by phpBB © 2001, 2005 phpBB Group
|