| brent67 |
Sun Mar 21, 2004 5:15 pm |
|
Am hoping someone can help with an idea or two on how to tighten up the fit of the throttle/linkage lever on the throttle shaft in my 32 PDSIT's. The throttle shaft itself still fits nice and tight in the throttle body, no rebush is necessary. The "slop" is where the linkage lever fits over the shaft. I guess that thru years of use the hole in the lever has enlarged allowing the linkage to advance at least a 1/4" before the throttle starts to pick up. I'm thinking along the lines of filling the hole in the throttle lever and re-drilling. Any other ideas?
TIA, Brent |
|
| Bobnotch |
Mon Mar 22, 2004 3:05 pm |
|
| Brent, I posted a reply over on STF today for you. But I'd probably weld the hole semi-closed, and fix it right. |
|
| brent67 |
Mon Mar 22, 2004 8:56 pm |
|
Bob, Thanx :wink: As usual you are a big help.
On another note, what is the date of the "invasion" this year? Is there a web site?. Trying to hash out the shows I would like to attend this year...Am going to the "classic" for sure and the Great Canadian in Vancouver. Hopefully the Vegas Bug-In as well 8) Maybe a Bug O Rama. And the local shows/drags/cruises here in the Northwest. Should be a good year for ACVW "stuff"! |
|
| brent67 |
Mon Mar 22, 2004 10:11 pm |
|
| I found the "Invasion" site http://mywebpages.comcast.net/jaransonT3/2004Invasion/ |
|
| DubStyle |
Tue Mar 23, 2004 7:06 am |
|
I've done this repair for TypeThreeDetective in the UK.
1) Remove the Rod
2) Drill/Ream the hole up for a bushing
3) Press the bushings in and line ream to size.
Blam done deal. For a shipping if you don't need them tomorrow I can do it for you. |
|
| brent67 |
Wed Mar 24, 2004 1:06 pm |
|
| Thanx for the offer Anthony. Gonna go to the Spring Meet here in Wash this weekend to see if I can't locate some carbs/parts...but I'll keep your offer in mind tho 8) |
|
Powered by phpBB © 2001, 2005 phpBB Group
|