TheSamba.com :: View topic - keifernet

Tue Jun 19, 2007 5:50 pm

Bought a vent window frame/pivot. He was a great help. Fast shipping. Will work with again. Thanks Keith! :D

Sat Jun 23, 2007 12:01 am

:D
I sent a C/Q out on the Samba net requesting some parts, sure enough Keith caught the call and had the parts in the "Barn". He even threw in some that would make the complete package work!Seemed like he enjoys wrapping the pieces up because he spent more on Scotch Tape. Must have stock in 3-m! :lol: He also said he would answer my questions and the info works......cherish these gold nuggets ....he will spend more on shipping that what he quotes you.... If the cost on the wrapping post mark is more that what he quoted...hmmmmmmm?
Thumbs up Keith your the Man!
Doug : =D>

Sun Jun 24, 2007 7:42 am

My old 34 pict 3 was giving me fits. Everyone one The Samba recomended Kieth. So, after a few back and forth e-mails I sent him my core and recieved a completly rebuilt one. :D I got it in record time and slaped it in and VROOOM!!! I didn't even have to do any tweekn' to get the idle right. 8)

Thanks Keith for the service you provide!!!
Mike

Wed Jun 27, 2007 1:48 pm

Oustanding!

Took the rebuilt 34PICT-3 it out of the box, bolted it on, cranked it for a few seconds to fill the bowl, and she fired right up.

No hesitation, no "flat spot", PERFECT IDLE right out of the box… Truly "plug and play".

This was a MEXICAN (Bocar) 34PICT-3 on a SVDA dizzy…..
YES, they CAN be tuned to work properly!
I never would have believed it if I dind't experince it for myself.

This engine never ran so well.
I can only imagine how it will run after a new cap, rotor wires and plugs!

Keith, you rock!

Wed Jun 27, 2007 3:34 pm

keifernet gave me a smoking deal on an early pedal assembly. Thanks!

Fri Jun 29, 2007 9:53 pm

keifernet bought some parts from me.

The payment arrived safely and he kept me updated on when it was being sent. He also called me Boss a few times, which made me feel happy inside. :)

Sun Jul 01, 2007 4:46 pm

Keifernet is awesome! The carb I bought from him was sent on time, worked well and was packed great. He even gave me free advice. I would purchase anyting Keith is selling without any reservation.

Tue Jul 03, 2007 2:18 pm

I never bought anything from Keith, but he was always, and i mean, ALWAYS there to help me with technical advice. No matter how small the question was, he was always helpful. Thanks a billion!

Mon Jul 09, 2007 11:25 am

Well, my story sounds like everyone else's! Keith sent me a rebuilt 34PICT3 carb in record one-weekend-long turn around time, answered all my questions, bent over backwards to help me and make sure I had what I needed, and then helped me a fix a problem that had nothing to do with the carb he sent me!

When it was all said and done, the bus cranked right up, and everything was perfect. Keith was a gentleman—helpful and knowledgeable and mindful of what I needed and my time line. He worked quickly and kept great communications, and his packaging was meticulous! Thanks again, Keith!

Wed Jul 11, 2007 7:33 am

I have been involved in transactions with Keith as both a buyer and a seller (both related to and not related to VW parts). Keith is trustworthy as well as knowledgeable about anything he recommends. If I had a need to have a carb rebuilt or any other work performed, I wouldn't hesitate to send anything to Keith. His technical knowledge is also above par.

Fri Jul 27, 2007 5:04 pm

Well... I bought some Type 3 backing plates from Keith and everything went great. I would not hesitate to buy parts form him again. Thanks... :D :D

Wed Aug 01, 2007 4:39 pm

I got my lugnuts the other day, and they all look great.. freshly restored and everything! Thanks again

Wed Aug 01, 2007 6:05 pm

I owe Keith big time.

He has now rebuilt/replaced two carbs for me that he probably should have sent back and told me to shove.

Being a total noob, I sent him two total crap cores. He still fixed me right up. The price was right and he answered all my stupid questions for me to boot.

He may not want to hear this... but all ymVW carb business now goes to Keith!

Sat Aug 18, 2007 2:08 pm

Like all these other folks the carb I got from Keith works beautifully straight from the box and Keith was top notch to work with

Sun Aug 19, 2007 8:16 pm

Keith has always been a big help to me when I'm in a bind. He's honest and is an excyclopedia of VW knowledge. He even stopped what he was doing and helped me finish the ball joints on my car. Good man, I wouldn't hesitate to do business with him.

Mon Aug 20, 2007 9:46 am

I had Keifernet Rebush my throttle plates for my type III and he did a great job. Fast turn around too. I will be calling him in the future for all the things I can't do! :P

Sun Aug 26, 2007 10:34 am

I sent my 34PICT3 to the 'other guys' for some service. When it came back my Thing would no longer idle, but the 'other guy' would not stand behind his work.
After working on the carb for 3 months I discovered that keifernet can fix carbs, so I sent it to him.

He returned my carb to me in perfect working order. He had pre-adjusted the carb and I only had to bolt it on and start the car.
And it does run much better than before all the work was done.
Whatever he did, it only took 7 work days from the time I shipped the carb until I got it back.

In the box were a number of canvas bags. It was like an unwanted surprise which had no positive or negative effect on your feelings, yet he still took the time to do something 'a little extra'. Nice touch.

Today I drove my Thing for the first time in 5 months.
My name is alg and I am a Volkswagen-a-holic.

Thu Sep 06, 2007 3:33 pm

I recently sent my throttle plates to Keifernet to be rebushed.
it took 1 week from the time I sent them until receiving them back.
He offers fair pricing, quality work and quick turnaround.
Thanks Keith.

Fri Sep 07, 2007 9:09 pm

Just got my rebuilt/rebushed Solex 34pict 3 put on. I had a California model Bocar on there. Man what a difference. I actually drive a go kart now! If I ever need any carb work done I know where I'll be sending it.

John

Sat Sep 15, 2007 9:34 am

after bolting the 28 solex carb that keith rebuilt to my buddies engine, she fired right up and ran as smooth as i have ever heard that car run before. all i had to do was adjust the idle screw other wise it is completely dialed in.

keith was great at letting me know what was going on with the rebuilt and didnt proced with any changes untill we gave him the go ahead with it. a stand up guy and deffinatly the man you should send you solex to if it needs any work.

any other solex carbs i need rebuilt will be going straight to keith.