| Viz |
Thu Jun 03, 2004 9:05 am |
|
Hi all-
Long story as to why this is occuring, but...
I want to mate a 1960 'vert body to a 1967 coupe pan. Anyone dealt with similar? I'm mostly curious about the two bolts thru the front body mounts to the front beam, and the rear body to pan brackets. Are they going to line up, or am I going to have some pain. I can pretty much do whatever is needed, just want some clues if there are some!
BTW- have 67 &68 coupe doors and hoods, 60 and 68 decklids, couple of roofs, and just basically three cars worth of parts- I only really need one cars worth, so if you need something I can help with, let me know.
Chris |
|
| keifernet |
Thu Jun 03, 2004 10:10 am |
|
Yes the 60 will fit the 67. You may or may not have to modify the mount on the rear fender well by the shock.
If the 67 is a standard bug (non vert) pan then the jack mount points will have to be cut off. Otherwise things are the same. The support rails are part of the vert body not the pan.
Where are your parts located at? |
|
| Viz |
Thu Jun 03, 2004 11:26 am |
|
So far so good- jack points are gone, pan is black powdercoat, getting dusty waiting for a body. I' s rolling chassis.
I'm in Sanger, Calif- just outside Fresno
Thanks |
|
Powered by phpBB © 2001, 2005 phpBB Group
|