| wayne1302 |
Thu Jul 15, 2004 10:06 am |
|
can anyone help me i have a 1971 1302LS when i bought it, it had no brake pipes or hoses. i bought a new set of pipes and hoses but i dont know where abouts they bend, or in what way the hoses bend. does anyone have a copy of a diagram or a sketch of the brake system my repair manual doesnt cover the pipes or hoses.
kind regards
wayne |
|
| keifernet |
Thu Jul 15, 2004 3:36 pm |
|
Are there any other bugs in your area? It would be easy if you could find one to look at.
Or maybe someone knows where some pics are posted.
the rubber hoses don't need bending they just "flex" in place and are held in by some metal clips.
This is a super beetle right?
as the front lines are different in orientation than a regular beetle. |
|
| blue72super |
Thu Jul 15, 2004 4:27 pm |
|
| What pipes are you missing? The rear lines go from the connector blocks at the inboard forward corner of the trailing arms to the wheel cylinders following the curvature of the trailing arms. The front lines come straight down the front side of the struts and then curve around the base of the strut to the wheel cylinders. |
|
| wimkever |
Fri Jul 16, 2004 11:33 am |
|
you should look at :
http://www.1302super.com/page39a.html
It shows a clear picture of the lay out of the 1302 brake lines
good luck
Wim |
|
Powered by phpBB © 2001, 2005 phpBB Group
|