| CJM722 |
Tue Jul 20, 2004 7:52 pm |
|
| Ok what are some lowbugget Forced induction options? can i use a judson SC? |
|
| Terran |
Tue Jul 20, 2004 8:27 pm |
|
| depends what you mean by "low budget" judson is cheap, Cbperformance and other like that are not as cheap but better, i think JC whiteny has a cheap setup. |
|
| Ace |
Tue Jul 20, 2004 9:04 pm |
|
http://www.jcwhitney.com/autoparts/ProductDisplay/...Id-1001811
Damn |
|
| CJM722 |
Wed Jul 21, 2004 8:34 am |
|
| Is it possble to get all the parts for it for less than 1k>? |
|
| Poor Realist |
Wed Jul 21, 2004 11:01 am |
|
CJM722 wrote: Is it possble to get all the parts for it for less than 1k>?
Yes, but then you are going to go to the junkyard and do a lot of your own fabbing. You will also have to do quite a bit of research to get the turbo set up right. So, yes, you could even do it for free if you are lucky and have lots of time.
Your choice: time or money. It's the usual conundrum. |
|
| Daniel G |
Wed Jul 21, 2004 7:50 pm |
|
Go to http://www.dune-buggy.com/buggylinks/Tech_Tips/Turbocharging/ You might find something useful there.
Daniel |
|
| CJM722 |
Wed Jul 21, 2004 8:21 pm |
|
i'll be doin all the fabbing, my question what turbos best? what carb is best? also where to mount a damn oil cooler?
i've also seen people make a plate where the fuel pump goes, to put an oil feed line to get oil to the turbo? |
|
Powered by phpBB © 2001, 2005 phpBB Group
|