| oilspot |
Tue Oct 26, 2004 3:01 pm |
|
I can't get my RR tailight working. It has power, is well grounded, tried a new buld, and even a different housing (all of which I've cleaned the contacts on).
I still can't get the light to work???
Anything I'm missing??? |
|
| rusty57 |
Tue Oct 26, 2004 3:03 pm |
|
| You have two grounds on it right? One right behind the bulb and another to the housing. |
|
| oilspot |
Tue Oct 26, 2004 3:36 pm |
|
| it's a 64' style tailight. It grounds to the body via a "spike" right below the top bolt hole. It is grounded well (I trimmed the rubber around the tailght seal a little to make sure it could). |
|
| Fish |
Tue Oct 26, 2004 3:39 pm |
|
| Take a short piece of wire and touch it to a clean spot of metal on the tail light housing and on a clean spot of metal on the body. The light should come on. You should then permently attach the wire to make a good connection to ground. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|