Jeff Power |
Thu Jan 06, 2005 2:12 pm |
|
I recently replaced a cut and turned beam in my bus with a stock one from a swap meet. I think that it sat uninstalled for quite a long time before we put it under my bus. Anyways I used some dropped spindles to lower the front end back down, but it doesn't seem to want to go as far down as it should. It just doesn't sit like the others with dropped spindles that I've seen. Is it possible that the old shocks could be keeping it from settling all the way down? If not any other ideas? Thanks |
|
Jeff Power |
Thu Jan 06, 2005 6:57 pm |
|
anybody. |
|
Buckly |
Thu Jan 06, 2005 8:21 pm |
|
Pull the shocks out and see if it sits lower. If so, there's your answer. |
|
Jeff Power |
Fri Jan 07, 2005 6:50 am |
|
now i just feel dumb. thanks |
|
Powered by phpBB © 2001, 2005 phpBB Group
|