| c.j. |
Thu Jan 20, 2005 8:42 pm |
|
| Hi guys, I just bought a 57 that came with a complete non running stock engine and want to put in my 1641 engine for now. Can I put the 57's flywheel and clutch assembly on the 1641 and install ? It seems to be a lot easier than trimming out the trans to fit the larger flywheel and since I have all the parts I wont have to buy anything. I already converted the electrical to 12v. |
|
| bill may |
Fri Jan 21, 2005 7:28 am |
|
| the 36 hp flywheel will not fit on 40 hp and newer. prefer 1966 typeII which is 180 flywheel ,but has 200 MM clutch. |
|
| c.j. |
Fri Jan 21, 2005 2:49 pm |
|
| O.K. thanks bill,I also have the flywheel and clutch assembly for the 1641 engine. Do I have to buy a 12v starter? or can I just change the bushing and gear? |
|
| joemac |
Sat Jan 22, 2005 8:45 pm |
|
The hub of the crankshafts are different between six and twelve volt systems.
If you are converting to 12, you will have to grind out the bell housing a little, The choices of starters are to install the adaptor starter bushing, or buy a starter that carries the number SR17, which needs no bushing. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|