| View previous topic :: View next topic |
| Author |
Message |
oldbug Samba Member
Joined: September 02, 2003 Posts: 380 Location: Port Orchard WA
|
Posted: Thu Jan 22, 2004 12:31 pm Post subject: gas tank resto |
|
|
I am restoring a 57 gas tank. I have heard of a cleaning method that
radiator shops can do to the inside of the tank. does anyone know what
that is called
Thanks Ed |
|
| Back to top |
|
 |
UncleBob Grease Midget

Joined: August 21, 2002 Posts: 2875 Location: Northeast Florida
|
Posted: Thu Jan 22, 2004 1:04 pm Post subject: |
|
|
Boiling. _________________ OG JHC
don't worry, the ciggaret is fake. |
|
| Back to top |
|
 |
gophercat Samba Member
Joined: January 03, 2004 Posts: 193 Location: Austin, Texas
|
Posted: Thu Jan 22, 2004 3:12 pm Post subject: |
|
|
| You can also do it yourself with a resto kit if you want to go that way as well. Usually costs about $45-50 dollars for the kit. |
|
| Back to top |
|
 |
Glenn  Mr. 010

Joined: December 25, 2001 Posts: 55841 Location: Long Island, New York, USA
|
|
| Back to top |
|
 |
Major Woody Samba Enigma

Joined: December 04, 2002 Posts: 8750 Location: Portland, OR
|
Posted: Thu Jan 22, 2004 5:07 pm Post subject: |
|
|
| Quart of muriatic acid in a gallon of water, and toss in a length of heavy old chain. Seal openings, wear skin and eye protection, and shake. Drink beer, shake, and repeat. Dump onto bitchy old neighbor's lawn in middle of night. Rinse and coat with rust converter like Picklex, and then the POR protective coating. |
|
| Back to top |
|
 |
oldbug Samba Member
Joined: September 02, 2003 Posts: 380 Location: Port Orchard WA
|
Posted: Sun Jan 25, 2004 12:56 pm Post subject: |
|
|
Thanks for all the help guys think i will try the boiling and por15
ed |
|
| Back to top |
|
 |
FL_VERT Samba Member

Joined: July 16, 2003 Posts: 173 Location: Tampa Bay
|
Posted: Sun Jan 25, 2004 3:27 pm Post subject: |
|
|
I just looked at the kit.... I Just bought a new tank instead and a whole lot less work on my part..
$70.00 Radiator Shop
$65.00+ Por 15 kit plus shipping
$80.00 New Tank
If I was to restore a tank I would have it chemically dipped, Galavanized, powdercoated/or Painted, Sealed inside....... |
|
| Back to top |
|
 |
Saggs Samba Member
Joined: December 23, 2003 Posts: 540 Location: VT
|
Posted: Mon Jan 26, 2004 8:32 am Post subject: |
|
|
| where do we dump the muriatic concoction if we don't have a bitchy old neighbor near by? Is it good for the finless browns in the storm drains? Is the POR 15 coating inside a permanent fix? |
|
| Back to top |
|
 |
Major Woody Samba Enigma

Joined: December 04, 2002 Posts: 8750 Location: Portland, OR
|
Posted: Mon Jan 26, 2004 10:46 am Post subject: |
|
|
Dump it into a plastic pail. Neutralize it by stirring in a box of baking soda. Then flush it down the toilet.
Replacement tanks are a good option if they are available. There is no replacement tank available for my car, plus I just like the idea of reusing as much of the original car as possible.
The POR coating (it is not POR-15 which is a rust converter and encapsulator) is advertised as a permanent coating. I have never heard any stories of it failing.
I think the radiator shop trip is unnecessary. Any real man has chain in his garage and a few cans of beer. Just go buy yourself some $5 acid and go for it. |
|
| Back to top |
|
 |
Glenn  Mr. 010

Joined: December 25, 2001 Posts: 55841 Location: Long Island, New York, USA
|
Posted: Mon Jan 26, 2004 10:57 am Post subject: |
|
|
Before restoring my tank, i purchased a replament tank. The metal was alot thinner, the hose fittings didn't lineup correctly and i didn't like the MADE IN BRAZIL that was stamped into the metal on top.
And after that you should still coat the inside and paint the outside.
I had mine boiled ($30), then powder painted it and finally used the POR Gas Tank Sealant.
It should be good for many years... more than a Brazilian replacement tank. _________________ Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"
HBB/RW
www.DasVolks.com
Long Island's Aircooled Club |
|
| Back to top |
|
 |
Saggs Samba Member
Joined: December 23, 2003 Posts: 540 Location: VT
|
Posted: Mon Jan 26, 2004 1:11 pm Post subject: |
|
|
| thanks for the acid tip, Ive got a crusty old tank in a 56 oval I'm restoring and the $5.00 for chemical and $10.00 for beer is a fun and educational alternative. |
|
| Back to top |
|
 |
6d7vdub Samba Slacker

Joined: October 08, 2003 Posts: 993 Location: Seattle
|
Posted: Mon Jan 26, 2004 4:55 pm Post subject: |
|
|
There is a pretty informative article on this exact subject in Hot VWs January 04 edition. _________________ Bill
Sadie's Site
http://positivepause.com |
|
| Back to top |
|
 |
spookymulder Samba Proletariat

Joined: January 02, 2004 Posts: 3242 Location: I'm either at 95608, 97537 or 94708 only my CPA knows for sure
|
Posted: Tue Jan 27, 2004 8:33 pm Post subject: |
|
|
| I use a product called Rusteco www.rusteco.com for cleaning the tank. I then use this product called Slushing Compound.available from www.mossmotors.com You pour it in, slush it around and pour out the excess. Let dry for 24 hours and use. It kicks ass, fills little rust pin holes and makes the inside look like brand new. |
|
| Back to top |
|
 |
orangebug60guy Twin #1

Joined: June 28, 2003 Posts: 1157 Location: Dudley Mass
|
Posted: Wed Jan 28, 2004 4:54 am Post subject: |
|
|
how long do gas tanks last? _________________ 66 bus with factory slider!- $50
Arachibutyrophobia- Fear of peanut butter sticking to the roof of the mouth.
Coprastasophobia- Fear of constipation. |
|
| Back to top |
|
 |
Glenn  Mr. 010

Joined: December 25, 2001 Posts: 55841 Location: Long Island, New York, USA
|
Posted: Wed Jan 28, 2004 6:35 am Post subject: |
|
|
| orangebug60guy wrote: |
| how long do gas tanks last? |
It depends on how much water is in the gas you buy.
Many rust from the inside out. Others rust due to leaky trunk seals. My 74's rusted in 10 years, but my 57 has the original. _________________ Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"
HBB/RW
www.DasVolks.com
Long Island's Aircooled Club |
|
| Back to top |
|
 |
Major Woody Samba Enigma

Joined: December 04, 2002 Posts: 8750 Location: Portland, OR
|
Posted: Wed Jan 28, 2004 9:58 am Post subject: |
|
|
| My 56 has the original. They rust just like anything else made of steel. Tank wasn't too bad--car spent most of its life in California and I think the heat there kept the condensation in the tank down. |
|
| Back to top |
|
 |
|