Author |
Message |
cyleriggs Samba Member
Joined: February 13, 2008 Posts: 30 Location: Kansas City, Missouri, USA
|
Posted: Thu May 15, 2008 10:09 am Post subject: Need Advice: American Eagle 5 lug w/Cip1 Disc Conversion |
|
|
I need some advice here on how to resolve this. I have american eagle 5 lugs with 4 lug to 5 lug wheel adapters on a '71 super, all was working fine till I went to install the disc conversion kit from cip1. Now the wheel adapters are hitting the calipers!!!
What should I do, I'm not really in love with these wheels, but from what i'm seeing it will cost $800+ to get a set of decent 4 lug wheels. I really don't want to put drums back on just so I can have these silly 5 lug wheels(they were on the car when I purchased it), what are my options? |
|
Back to top |
|
|
flyinglow94 Samba Member
Joined: January 17, 2005 Posts: 1165 Location: Las Vegas, Nevada
|
Posted: Thu May 15, 2008 2:11 pm Post subject: |
|
|
I am running an American wheel spacer behind my adapter to use my five spokes. It is about 3/8 of an inch thick. The spacer will bring the adapter away from the caliper. And I also machined off 7/16 of an inch of of the back of the 5 spokes (the pedestals that contact the drum or adapter).
_________________ "What we obtain too cheap, we esteem too lightly: 'tis dearness only that gives everything its value. Heaven knows how to put a proper price upon its goods; and it would be strange indeed if so celestial an article as FREEDOM should not be highly rated."
"Socialism is a philosophy of failure,the creed of ignorance, and the gospel of envy,its inherent virtue is the equal sharing of misery.." |
|
Back to top |
|
|
flyinglow94 Samba Member
Joined: January 17, 2005 Posts: 1165 Location: Las Vegas, Nevada
|
Posted: Thu May 15, 2008 2:14 pm Post subject: |
|
|
Sorry double post. _________________ "What we obtain too cheap, we esteem too lightly: 'tis dearness only that gives everything its value. Heaven knows how to put a proper price upon its goods; and it would be strange indeed if so celestial an article as FREEDOM should not be highly rated."
"Socialism is a philosophy of failure,the creed of ignorance, and the gospel of envy,its inherent virtue is the equal sharing of misery.."
Last edited by flyinglow94 on Thu May 15, 2008 2:20 pm; edited 1 time in total |
|
Back to top |
|
|
flyinglow94 Samba Member
Joined: January 17, 2005 Posts: 1165 Location: Las Vegas, Nevada
|
Posted: Thu May 15, 2008 2:16 pm Post subject: |
|
|
flyinglow94 wrote: |
The rocket alloy has about 7/16 less than the eagle alloy. This is the Rocket alloy have machined my eagles to fit better. So the answer is yes it is doable.
And here is the Eagle before I machined it.
|
_________________ "What we obtain too cheap, we esteem too lightly: 'tis dearness only that gives everything its value. Heaven knows how to put a proper price upon its goods; and it would be strange indeed if so celestial an article as FREEDOM should not be highly rated."
"Socialism is a philosophy of failure,the creed of ignorance, and the gospel of envy,its inherent virtue is the equal sharing of misery.." |
|
Back to top |
|
|
|