| View previous topic :: View next topic |
| Author |
Message |
bajamike560
Samba Member
Joined: December 11, 2009
Posts: 489
Location: Vancouver WA
|
 Posted: Mon Mar 05, 2012 9:31 pm Post subject: |
 |
|
Pull left carb off and take it apart clean it up really good. Sounds to me that there is a plugged jet by what you posted, and pull the filter out of the carb to see if it has any flow issues also.
Mike
_________________
Jackpot motorsports |
|
| Back to top |
|
 |
AEH
Samba Member
Joined: October 16, 2011
Posts: 286
Location: Fort Smith, AR
|
|
| Back to top |
|
|
EMPIImp69
Samba Member
Joined: April 17, 2006
Posts: 2829
Location: Dirty Jersey
|
| Posted: Tue Mar 06, 2012 6:20 am Post subject: |
|
|
Thanks guys, I need to get some bigger tires for the fronts and polish them up too. Thanks Mike I'm going to try pulling the carb off tonight and see what I find.
My buddy and I are are competing to see who can get their baja roadworthy first.. 
_________________
1969 Empi Imp #1325
Sandrail
1971 Baja
1986 Jeep CJ7
2002 Mustang GT |
|
| Back to top |
|
|
CON6642
Samba Member
Joined: August 30, 2008
Posts: 30
Location: Central Jersey
|
| Posted: Wed Mar 07, 2012 7:11 pm Post subject: |
|
|
That red baja is awesome!! 
_________________
63 Ragtop
56 Oval
68 Baja (76 Pan)
Sand Rail - Sold
61 Ragtop - Sold |
|
| Back to top |
|
|
EMPIImp69
Samba Member
Joined: April 17, 2006
Posts: 2829
Location: Dirty Jersey
|
| Posted: Wed Mar 07, 2012 7:57 pm Post subject: |
|
|
Yea yea..got the baja running pretty good after cleaning out that carb. Got the front seats in and some lights working.
_________________
1969 Empi Imp #1325
Sandrail
1971 Baja
1986 Jeep CJ7
2002 Mustang GT |
|
| Back to top |
|
|
bajamike560
Samba Member
Joined: December 11, 2009
Posts: 489
Location: Vancouver WA
|
| Posted: Wed Mar 07, 2012 9:22 pm Post subject: |
|
|
| CON6642 wrote: | | That red baja is awesome!! |
Yes very nice, but missing something.......  
Mike
_________________
Jackpot motorsports |
|
| Back to top |
|
|
CON6642
Samba Member
Joined: August 30, 2008
Posts: 30
Location: Central Jersey
|
| Posted: Wed Mar 07, 2012 9:40 pm Post subject: |
|
|
The red one is mine..
_________________
63 Ragtop
56 Oval
68 Baja (76 Pan)
Sand Rail - Sold
61 Ragtop - Sold |
|
| Back to top |
|
|
bajamike560
Samba Member
Joined: December 11, 2009
Posts: 489
Location: Vancouver WA
|
| Posted: Wed Mar 07, 2012 10:46 pm Post subject: |
|
|
| CON6642 wrote: | | The red one is mine.. |
Please send dirty pix..... 
Car is tooooo clean.....
Like I said, missing something.
(but I really have no room to talk or throw poo) 
Mike
_________________
Jackpot motorsports |
|
| Back to top |
|
|
EMPIImp69
Samba Member
Joined: April 17, 2006
Posts: 2829
Location: Dirty Jersey
|
| Posted: Thu Mar 08, 2012 6:07 am Post subject: |
|
|
| bajamike560 wrote: | | CON6642 wrote: | | The red one is mine.. |
Please send dirty pix.....
Car is tooooo clean.....
Like I said, missing something.
(but I really have no room to talk or throw poo)
Mike |
Haha you tell him Mike!
_________________
1969 Empi Imp #1325
Sandrail
1971 Baja
1986 Jeep CJ7
2002 Mustang GT |
|
| Back to top |
|
|
CON6642
Samba Member
Joined: August 30, 2008
Posts: 30
Location: Central Jersey
|
| Posted: Fri Mar 09, 2012 12:09 am Post subject: |
|
|
| bajamike560 wrote: | | CON6642 wrote: | | The red one is mine.. |
Please send dirty pix.....
Car is tooooo clean.....
Like I said, missing something.
(but I really have no room to talk or throw poo)
Mike |
No offense Mike, I'm sure you are a great guy.. but I only accept requests for "dirty pix" from the ladies! lol
_________________
63 Ragtop
56 Oval
68 Baja (76 Pan)
Sand Rail - Sold
61 Ragtop - Sold |
|
| Back to top |
|
|
norcalmike
Samba Member
Joined: May 14, 2005
Posts: 4160
Location: Campbell, CA
|
| Posted: Fri Mar 09, 2012 1:51 am Post subject: |
|
|
where did you get that lower tin under the cylinders? thats not right.
looks like type 3 tin
this is the only tin that should be under your cylinders
PS: those arent my toes
_________________
73 Thing
61 Double Cab
WANTED: Howe Motors Plate Frames |
|
| Back to top |
|
|
EMPIImp69
Samba Member
Joined: April 17, 2006
Posts: 2829
Location: Dirty Jersey
|
| Posted: Fri Mar 09, 2012 6:18 am Post subject: |
|
|
^^I use the Type 3 lower tin on all my engines as do a lot of people. Why is it not right if they provide better cooling circulation than those little Type 1 ones? This is in a baja..we don't use all those big dog sled tins running underneath so I just use the Type 3 tin.
_________________
1969 Empi Imp #1325
Sandrail
1971 Baja
1986 Jeep CJ7
2002 Mustang GT |
|
| Back to top |
|
|
bajamike560
Samba Member
Joined: December 11, 2009
Posts: 489
Location: Vancouver WA
|
| Posted: Fri Mar 09, 2012 10:22 am Post subject: |
|
|
| CON6642 wrote: | | bajamike560 wrote: | | CON6642 wrote: | | The red one is mine.. |
Please send dirty pix.....
Car is tooooo clean.....
Like I said, missing something.
(but I really have no room to talk or throw poo)
Mike |
No offense Mike, I'm sure you are a great guy.. but I only accept requests for "dirty pix" from the ladies! lol |
None taken. I can be "good" sometimes but not great.
And thanks for setting me straight on the pix, I did not think that far into it. And at-least your car looks nice, your eyes probably will hurt if you see my car.
Mike
_________________
Jackpot motorsports |
|
| Back to top |
|
|
bajamike560
Samba Member
Joined: December 11, 2009
Posts: 489
Location: Vancouver WA
|
| Posted: Fri Mar 09, 2012 10:23 am Post subject: |
|
|
| EMPIImp69 wrote: | | ^^I use the Type 3 lower tin on all my engines as do a lot of people. Why is it not right if they provide better cooling circulation than those little Type 1 ones? This is in a baja..we don't use all those big dog sled tins running underneath so I just use the Type 3 tin. |
Me also, never a problem.
Mike
_________________
Jackpot motorsports |
|
| Back to top |
|
|
norcalmike
Samba Member
Joined: May 14, 2005
Posts: 4160
Location: Campbell, CA
|
| Posted: Fri Mar 09, 2012 12:04 pm Post subject: |
|
|
Sorry, didn't realize you Did it on purpose
_________________
73 Thing
61 Double Cab
WANTED: Howe Motors Plate Frames |
|
| Back to top |
|
|
Bashr52
Samba Member
Joined: July 16, 2006
Posts: 2981
Location: On the Hill In J.C.
|
| Posted: Fri Mar 09, 2012 12:19 pm Post subject: |
|
|
| EMPIImp69 wrote: | | ^^I use the Type 3 lower tin on all my engines as do a lot of people. Why is it not right if they provide better cooling circulation than those little Type 1 ones? This is in a baja..we don't use all those big dog sled tins running underneath so I just use the Type 3 tin. |
I have also run type 3 tins. After talking to Jake Raby though, and hearing the results of his cooling tests, I have since switched back to the type 1 tins. type 3 tins belong on type 3's due to the cooling fan setup. There is no advantage to running them on a type 1.
To each his own though. Run them if thats what you've been doing, but don't expect any amazing results like what is advertised. |
|
| Back to top |
|
|
joescoolcustoms 
Samba Member
Joined: August 08, 2006
Posts: 6353
Location: West By God Virginia
|
| Posted: Fri Mar 09, 2012 1:36 pm Post subject: |
|
|
| Bashr52 wrote: | | EMPIImp69 wrote: | | ^^I use the Type 3 lower tin on all my engines as do a lot of people. Why is it not right if they provide better cooling circulation than those little Type 1 ones? This is in a baja..we don't use all those big dog sled tins running underneath so I just use the Type 3 tin. |
I have also run type 3 tins. After talking to Jake Raby though, and hearing the results of his cooling tests, I have since switched back to the type 1 tins. type 3 tins belong on type 3's due to the cooling fan setup. There is no advantage to running them on a type 1.
To each his own though. Run them if thats what you've been doing, but don't expect any amazing results like what is advertised. |
Jake's testing was run with full tins in place, then adding the T3 cool tins. It is a complete different dynamic when the full tins are not run, like on a baja, rail buggy or fiberglass buggy.
I run the original T1 tins when the engine is installed with full tins. I run the T3 cool tins when the engne will be in the open without the advantage of the full factory tins in place.
First set of T3 cool tins I used was back in 1984 in a 1915cc that I got over 100,000 miles out of.
_________________
The early bird might get the worm, but the second mouse gets the cheese.
Looks like it was painted with a live chicken,polished with a brick and buffed with a pine cone
Member of Wagenfolks
http://images.thesamba.com/vw/gallery/pix/870707.jpg
http://www.thesamba.com/vw/forum/viewtopic.php?t=479740 |
|
| Back to top |
|
|
EMPIImp69
Samba Member
Joined: April 17, 2006
Posts: 2829
Location: Dirty Jersey
|
| Posted: Sat Mar 10, 2012 7:03 am Post subject: |
|
|
| Bashr52 wrote: | | EMPIImp69 wrote: | | ^^I use the Type 3 lower tin on all my engines as do a lot of people. Why is it not right if they provide better cooling circulation than those little Type 1 ones? This is in a baja..we don't use all those big dog sled tins running underneath so I just use the Type 3 tin. |
I have also run type 3 tins. After talking to Jake Raby though, and hearing the results of his cooling tests, I have since switched back to the type 1 tins. type 3 tins belong on type 3's due to the cooling fan setup. There is no advantage to running them on a type 1.
To each his own though. Run them if thats what you've been doing, but don't expect any amazing results like what is advertised. |
Yea I agree, I don't expect any miracles with them..oh and is that chic your girlfriend Bashr? 
_________________
1969 Empi Imp #1325
Sandrail
1971 Baja
1986 Jeep CJ7
2002 Mustang GT |
|
| Back to top |
|
|
bomberbaja
Samba Member
Joined: January 18, 2010
Posts: 553
Location: Tri-Cities WA
|
| Posted: Sat Mar 10, 2012 1:58 pm Post subject: |
|
|
| joescoolcustoms wrote: | | Bashr52 wrote: | | EMPIImp69 wrote: | | ^^I use the Type 3 lower tin on all my engines as do a lot of people. Why is it not right if they provide better cooling circulation than those little Type 1 ones? This is in a baja..we don't use all those big dog sled tins running underneath so I just use the Type 3 tin. |
I have also run type 3 tins. After talking to Jake Raby though, and hearing the results of his cooling tests, I have since switched back to the type 1 tins. type 3 tins belong on type 3's due to the cooling fan setup. There is no advantage to running them on a type 1.
To each his own though. Run them if thats what you've been doing, but don't expect any amazing results like what is advertised. |
Jake's testing was run with full tins in place, then adding the T3 cool tins. It is a complete different dynamic when the full tins are not run, like on a baja, rail buggy or fiberglass buggy.
I run the original T1 tins when the engine is installed with full tins. I run the T3 cool tins when the engne will be in the open without the advantage of the full factory tins in place.
First set of T3 cool tins I used was back in 1984 in a 1915cc that I got over 100,000 miles out of. |
When I was building my engine I decided to use T3 lower tins because I have a baja. If I was running a sealed engine bay, then I would have used T1 tins. Glad I'm not the only one who reached this conclusion  |
|
| Back to top |
|
|
Bashr52
Samba Member
Joined: July 16, 2006
Posts: 2981
Location: On the Hill In J.C.
|
| Posted: Sat Mar 10, 2012 4:37 pm Post subject: |
|
|
| EMPIImp69 wrote: | | Bashr52 wrote: | | EMPIImp69 wrote: | | ^^I use the Type 3 lower tin on all my engines as do a lot of people. Why is it not right if they provide better cooling circulation than those little Type 1 ones? This is in a baja..we don't use all those big dog sled tins running underneath so I just use the Type 3 tin. |
I have also run type 3 tins. After talking to Jake Raby though, and hearing the results of his cooling tests, I have since switched back to the type 1 tins. type 3 tins belong on type 3's due to the cooling fan setup. There is no advantage to running them on a type 1.
To each his own though. Run them if thats what you've been doing, but don't expect any amazing results like what is advertised. |
Yea I agree, I don't expect any miracles with them..oh and is that chic your girlfriend Bashr? |
That is actually my fiance now
Not saying the type 3 tins wont work, just that they arnt really necessary. |
|
| Back to top |
|
|
|
