Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Brent's 69 Fastback Build
Page: Previous  1, 2, 3 ... 21, 22, 23 ... 29, 30, 31  Next
Jump to:
Forum Index -> Type 3 Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
Brent
Samba Member


Joined: April 28, 2010
Posts: 1613
Location: San Tan Valley, AZ
Brent is offline 

PostPosted: Fri Apr 13, 2012 8:54 am    Post subject: Reply with quote

Yeti69 - I'll probably just use a ring terminal on the coupler bolt for the wire coming out of the column.

I don't have the wipers on my turn signal switch so there is no current path there. As I understand, it flows from the column, to the button through the adapter, then back through the brown wire in the column. I have the steering box to frame jumper piece.

Bobnotch wrote:
No Brent, it's not just a 67 and earlier deal. Both of my 71's still have them, as does my wife's 70. What you're looking for are the 36, 37, 38, 39, and 40 in the illustration. However, you're going to want the 68 and later bits, as the 67 and earlier pieces are different (holes are closer together). I don't have a part number handy for them, but there should be 1 for them. Keep in mind that 38 and 40 are on the back side of the dash (top side of the mounting lip), and should be "caged" by some tabs.


Thank you for the clarification. Seems I'm missing a few things. They were not there when I took it out. Too bad the diagrams for steering are so vague and mix-up all the differences between model years. Now to find those missing parts and put this thing together!

Update pics later today...
_________________
69 Fastback Build
Berg5 Build
Back to top
View user's profile Send private message Facebook Gallery Classifieds Feedback
Bobnotch
Samba Member


Joined: July 06, 2003
Posts: 22356
Location: Kimball, Mi
Bobnotch is offline 

PostPosted: Fri Apr 13, 2012 10:00 am    Post subject: Reply with quote

vlad01 wrote:
thats BS! the splines are not different. they probably were on 72 and 73 but 71 had the same spines as the earlier wheels.

I know because I went and investigated it in person and compared 71 wheels to the rest of the models.


Well, maybe OZ used the old parts, but the German built cars used 1 steering wheel (part number 311 415 651A (4/61 to 7/70) up to chassis number 310 2500 000) for cars up thru the end of the 70 model year, and then used 311 415 651D (8/70 to 7/71 (chassis numbers 311 2000 001 thru 311 2500 000)) for cars built in 71. The parts book definitely call out 2 different wheels (not counting the pigellaies, and the teaks for the 66 MY).
It's like you keep telling us, OZ had it's own rules, and things are different for the rest of the world.

Getting this back on track, Brent, I didn't see a part number for the rubber bits, or the tubes, but I did find one for the nut plate. It's the same as a bug, so that might help you find the rubber bits.
_________________
Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote:
"Friends are God's way of apologizing for relatives."
Tram wrote:
People keep confusing "restored" and "restroyed".
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Mark Shutt
Samba Member


Joined: February 10, 2012
Posts: 482
Location: Doncaster UK.
Mark Shutt is offline 

PostPosted: Fri Apr 13, 2012 10:12 am    Post subject: Reply with quote

Hi Brent, are the upper frame head clamp rubber mounts still available? mine are missing and not sure what alternative parts I could use Question this build really interests me as I'm at a similar stage with mine!

Image may have been reduced in size. Click image to view fullscreen.



Mark.
Back to top
View user's profile Send private message Classifieds Feedback
Mike Fisher
Samba Member


Joined: January 30, 2006
Posts: 17962
Location: Eugene, OR
Mike Fisher is offline 

PostPosted: Fri Apr 13, 2012 10:17 am    Post subject: Reply with quote

I have a 36,37,38,39,40, & 1-41, but it is a narrower bolt pattern than the #43 I also have. Do you need the #43?
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey
Back to top
View user's profile Send private message Send e-mail Facebook Gallery Classifieds Feedback
Brent
Samba Member


Joined: April 28, 2010
Posts: 1613
Location: San Tan Valley, AZ
Brent is offline 

PostPosted: Fri Apr 13, 2012 10:25 am    Post subject: Reply with quote

Bobnotch wrote:
Getting this back on track, Brent, I didn't see a part number for the rubber bits, or the tubes, but I did find one for the nut plate. It's the same as a bug, so that might help you find the rubber bits.


So I'm guessing parts 36-39 are the same for all years, and 40 was changed to 43 for later years. Part 43 has two built-in nuts in the middle which I think are the same spacing as 40. 43 mounts to the dash using bolts through the two outer tabs and isolates the column via the two inner/middle mount points. I think.

Mark Shutt wrote:
Hi Brent, are the upper frame head clamp rubber mounts still available? mine are missing and not sure what alternative parts I could use Question this build really interests me as I'm at a similar stage with mine!

Mark.


Put up some pictures. Very Happy

Those are not available new. There's lots of good used around though. I probably have a set from all the beams I've been through.
_________________
69 Fastback Build
Berg5 Build
Back to top
View user's profile Send private message Facebook Gallery Classifieds Feedback
Brent
Samba Member


Joined: April 28, 2010
Posts: 1613
Location: San Tan Valley, AZ
Brent is offline 

PostPosted: Fri Apr 13, 2012 10:30 am    Post subject: Reply with quote

Mike Fisher wrote:
I have a 36,37,38,39,40, & 1-41, but it is a narrower bolt pattern than the #43 I also have. Do you need the #43?


I have 43, I just need 36-39. The spacing between the two inner 'nuts' on 43 is 60mm (2.36") which matches up with the slots on steering column housing.

So you're saying the spacing for 36-39 is NOT 60mm?
_________________
69 Fastback Build
Berg5 Build
Back to top
View user's profile Send private message Facebook Gallery Classifieds Feedback
Mike Fisher
Samba Member


Joined: January 30, 2006
Posts: 17962
Location: Eugene, OR
Mike Fisher is offline 

PostPosted: Fri Apr 13, 2012 10:42 am    Post subject: Reply with quote

50mm
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey
Back to top
View user's profile Send private message Send e-mail Facebook Gallery Classifieds Feedback
Brent
Samba Member


Joined: April 28, 2010
Posts: 1613
Location: San Tan Valley, AZ
Brent is offline 

PostPosted: Fri Apr 13, 2012 10:58 am    Post subject: Reply with quote

Mike Fisher wrote:
50mm


Evil or Very Mad I asked Jim Adney, hopefully he has them.
_________________
69 Fastback Build
Berg5 Build
Back to top
View user's profile Send private message Facebook Gallery Classifieds Feedback
Mark Shutt
Samba Member


Joined: February 10, 2012
Posts: 482
Location: Doncaster UK.
Mark Shutt is offline 

PostPosted: Fri Apr 13, 2012 11:00 am    Post subject: Reply with quote

Brent wrote:
Put up some pictures. Very Happy

Those are not available new. There's lots of good used around though. I probably have a set from all the beams I've been through.


just started a thread on my build!

Thanks, Mark.
Back to top
View user's profile Send private message Classifieds Feedback
flatblack12345
Samba Member


Joined: February 14, 2007
Posts: 46

flatblack12345 is offline 

PostPosted: Fri Apr 13, 2012 11:07 am    Post subject: Reply with quote

Nice build Brent! didn't relize you had a build thread on here..

Just sent your breather box today, hopefully it works for ya!
Enjoy

Image may have been reduced in size. Click image to view fullscreen.
Back to top
View user's profile Send private message Send e-mail Facebook Gallery Classifieds Feedback
spoon
Samba Penetrator


Joined: September 08, 2005
Posts: 1458
Location: Monterey, CA
spoon is offline 

PostPosted: Fri Apr 13, 2012 11:19 am    Post subject: Reply with quote

Shocked
_________________
Pit Bull Myths, Busted!
http://www.badrap.org/monster-myths

EverettB wrote:
Type 3 > Type 1
Back to top
View user's profile Send private message Gallery Classifieds Feedback
supaninja
Samba Member


Joined: July 03, 2010
Posts: 4020
Location: houston
supaninja is offline 

PostPosted: Fri Apr 13, 2012 11:31 am    Post subject: Reply with quote

That's not a breather box, that's a work of art Shocked Shocked
_________________
http://i5.photobucket.com/albums/y163/chucky1974/ninja.gif

Nick
Megasquirted Type 4 powered Notch http://www.thesamba.com/vw/forum/viewtopic.php?t=427890&postdays=0&postorder=asc&start=0
Blog of Doom http://supaninjanick.wordpress.com/
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger Facebook Classifieds Feedback
W1K1
Samba Member


Joined: March 04, 2004
Posts: 4894
Location: Southern AB
W1K1 is offline 

PostPosted: Fri Apr 13, 2012 11:46 am    Post subject: Reply with quote

Pretty snazzy where is that fitting on the body Brent?
_________________
http://www.thesamba.com/vw/archives/manuals/jim_martin_engine_build.php

1973 super
1965 squareback 1500E
1971 bay window westy- subi swap
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Brent
Samba Member


Joined: April 28, 2010
Posts: 1613
Location: San Tan Valley, AZ
Brent is offline 

PostPosted: Fri Apr 13, 2012 11:58 am    Post subject: Reply with quote

W1K1 wrote:
Pretty snazzy where is that fitting on the body Brent?


It will go on the right side, up underneath the deck about where the stock outlet is for the carbs/FI intake is. I might have to make some kind of quick-release bracket. We'll see when it gets here.
_________________
69 Fastback Build
Berg5 Build
Back to top
View user's profile Send private message Facebook Gallery Classifieds Feedback
Brent
Samba Member


Joined: April 28, 2010
Posts: 1613
Location: San Tan Valley, AZ
Brent is offline 

PostPosted: Fri Apr 13, 2012 11:58 am    Post subject: Reply with quote

2 1/2 days, 2 bottles of contact cement, a can of 3M 90 adhesive, 144 paper clips, and several cold beverages later, the headliner is done!

For what the upholstery shops are charging, I opted to do it myself.

The shiny aluminum stuff is EZ-Cool. It has pretty good reviews over on the HAMB, it's super light, and really easy to work with. I had started cutting the felt padding from the leftover stuff from my seats, but it is a PITA to work with. So I just kept using it for all the post padding. I think it turned out nice.

The pictures pretty much go in order. I made up the windlace/pinch welting for about $20 of material I bought from McMaster-Carr. I wanted the two-tone like the original.

Also got most everything stuffed under the dash, but it's rainy and dark today so I'll get some pictures this weekend.

Here goes (there's a lot).

Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.

_________________
69 Fastback Build
Berg5 Build
Back to top
View user's profile Send private message Facebook Gallery Classifieds Feedback
W1K1
Samba Member


Joined: March 04, 2004
Posts: 4894
Location: Southern AB
W1K1 is offline 

PostPosted: Fri Apr 13, 2012 12:35 pm    Post subject: Reply with quote

ooooh aaaaah nice job Very Happy

The easy cool does a good job of keeping things cool inside.
It can be 90 degrees outside on the roof and not even warm to the touch on the inside of mine. The weight for a whole roll is next to nothing VS the 20 lbs of dynamat I added to my bug.

plus if you lay on your back and shine a light at the roof it looks like twinkling stars through the holes in the headliner Laughing
_________________
http://www.thesamba.com/vw/archives/manuals/jim_martin_engine_build.php

1973 super
1965 squareback 1500E
1971 bay window westy- subi swap
Back to top
View user's profile Send private message Gallery Classifieds Feedback
supaninja
Samba Member


Joined: July 03, 2010
Posts: 4020
Location: houston
supaninja is offline 

PostPosted: Fri Apr 13, 2012 12:44 pm    Post subject: Reply with quote

I'm going to have to give that EZ Cool a try, the price is right. That pinch weld looks perfect, I am going to have to get with you when the time comes to do my headliner.
_________________
http://i5.photobucket.com/albums/y163/chucky1974/ninja.gif

Nick
Megasquirted Type 4 powered Notch http://www.thesamba.com/vw/forum/viewtopic.php?t=427890&postdays=0&postorder=asc&start=0
Blog of Doom http://supaninjanick.wordpress.com/
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger Facebook Classifieds Feedback
vwfye
Samba Member


Joined: April 15, 2000
Posts: 7660

vwfye is offline 

PostPosted: Fri Apr 13, 2012 1:05 pm    Post subject: Reply with quote

Applause
_________________
64 No'back Speedster "Pearl"
1980s Sand Dragster "The Plunger"
LME "Little Giant Killer 3"
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Tram
Samba Socialist


Joined: May 02, 2003
Posts: 22697
Location: Still Feelin' the Bern- Once you've felt it you can't un- feel it.
Tram is offline 

PostPosted: Fri Apr 13, 2012 1:11 pm    Post subject: Reply with quote

Brent wrote:
2 1/2 days, 2 bottles of contact cement, a can of 3M 90 adhesive, 144 paper clips, and several cold beverages later, the headliner is done!

For what the upholstery shops are charging, I opted to do it myself.

The shiny aluminum stuff is EZ-Cool. It has pretty good reviews over on the HAMB, it's super light, and really easy to work with. I had started cutting the felt padding from the leftover stuff from my seats, but it is a PITA to work with. So I just kept using it for all the post padding. I think it turned out nice.

The pictures pretty much go in order. I made up the windlace/pinch welting for about $20 of material I bought from McMaster-Carr. I wanted the two-tone like the original.

Also got most everything stuffed under the dash, but it's rainy and dark today so I'll get some pictures this weekend.

Here goes (there's a lot).

Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.


Brent- if you're happy with it, fine, and I'm not really trying to be a prick- but-

It shouldn't bow inward (down) in the middle like that. The reason it is doing that is the sound deadener on the roof. The key is to slice a groove through the deadener for the headliner bow to sit up in. This way, you can have your cake & eat it too, as the sound deadener in the roof makes quite the difference.

Other than that, it looks like a good solid installation. Very Happy
_________________
Немає виправдання для війни! Я з Україною.

Bryan67 wrote:
Just my hands. And a little lube. No tools.


To best contact me, please use the EMAIL function in my profile
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
VWporscheGT3
Samba Member


Joined: September 01, 2006
Posts: 2073
Location: Gardnerville, NV
VWporscheGT3 is offline 

PostPosted: Fri Apr 13, 2012 1:23 pm    Post subject: Reply with quote

Your my hero brent , you motivate me Laughing
_________________
Schnell, SCHNELL!

I like being wrong, Because, it is another opportunity to learn. If you stop learning from your mistakes than what is the point?

If you have any questions about Forged ICON 4032 VW pistons just shoot me a line.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Type 3 All times are Mountain Standard Time/Pacific Daylight Savings Time
Page: Previous  1, 2, 3 ... 21, 22, 23 ... 29, 30, 31  Next
Jump to:
Page 22 of 31

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.