I-beam con rods bushings

Irvin · Posted: Mon Apr 01, 2013 8:07 am Post subject: I-beam con rods bushings

Hi,
I have a set of four I-beam rods and at least one of them needs a new bushing.
Does anyone knows if the bushings made for the standard rods fit well into the I-beam rods ? They have no branding at all, it's the "standard" Ibeam design "everybody" has and I don't know where they come from.

Or at least do you know the outer diameter of the replacement bushings used for standard rods ?

Image may have been reduced in size. Click image to view fullscreen.

Thanks !

modok · Posted: Mon Apr 01, 2013 5:03 pm Post subject:

what size is the hole? stock ones are 24mm

Irvin · Posted: Tue Apr 02, 2013 5:33 am Post subject:

I have 23.95mm so it should fit, anyway I'll ask for custom bushings just to be sure to get the exact size I need inside and outside.
Thanks.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Performance/Engines/Transmissions		Share:
		Print View

	Forum Index -> Performance/Engines/Transmissions	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1