Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Turning my shocks upside down?
Forum Index -> HBB Off-Road Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
john.saylor
Samba Member


Joined: January 30, 2012
Posts: 51

john.saylor is offline 

PostPosted: Sun May 12, 2013 8:57 pm    Post subject: Turning my shocks upside down? Reply with quote

Sand rail vw 1835, had posted earlier my rear suspension was too soft and bottoming to often, I re-indexed one notch on the outside, all is good now except it springs back pretty hard, I am using KYB gas adjust, should I add another shock for rebound? someone told me to turn my shock upside down?
thanks
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Multi69s
Samba Member


Joined: January 24, 2006
Posts: 5360
Location: Lefty, CA
Multi69s is offline 

PostPosted: Mon May 13, 2013 1:06 am    Post subject: Reply with quote

If you flip your shock upside down the oil in the shock will be on the wrong side of the piston and you will probably lose more dampening.
_________________
69 road Bug 2110
73 Squareback - 2L, T4, Automatic W/ AC
Gone, but many fond memories 69 Baja Bug 2010 - 5 Rib Bus Transaxle
Gone but not forgotten 72 Baja Bug 2010
My builds
T4 into Squareback http://www.thesamba.com/vw/forum/viewtopic.php?t=458944&highlight=
Auto Trans Rebuild http://www.thesamba.com/vw/forum/viewtopic.php?t=516066&highlight=
AC in Squareback https://www.thesamba.com/vw/forum/viewtopic.php?t=...highlight=
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Dale M.
Samba Member


Joined: April 12, 2006
Posts: 20365
Location: Just a tiny bit west of Yosemite Valley
Dale M. is offline 

PostPosted: Mon May 13, 2013 6:06 am    Post subject: Reply with quote

You need to soften rear by taking some of the preload out from outside spline move by changing the inside splines if rear is to solid..... You just when from one extreme to another.... By also adjusting inside spline you have better control of preload (spring rate)...

IF you turn shocks upside down, you might as well just leave them off.... The shocks are not the problem of you harsh ride, the problem is in your adjustment of rear splines...

Dale
_________________
“Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.

"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ...
Back to top
View user's profile Send private message Gallery Classifieds Feedback
superpro56
Samba Member


Joined: July 25, 2012
Posts: 206
Location: Michigan
superpro56 is offline 

PostPosted: Mon May 13, 2013 7:08 am    Post subject: Reply with quote

Flipping shocks is an old racers trick. Its done to reduce unsprung mass, when the shock body is attached to the suspension arm it must be calculated into for unsprung mass. When the shock body is attached to the chassis, its not included in the calculation for unsprung mass. There is no performance change when flipping shocks, the piston still moves through the shock fluid just like it would if it were right side up.

I agree with Dale, this is an issue with indexing not shocks.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Multi69s
Samba Member


Joined: January 24, 2006
Posts: 5360
Location: Lefty, CA
Multi69s is offline 

PostPosted: Mon May 13, 2013 1:06 pm    Post subject: Reply with quote

I hate to start a fight, but like you said "flipping shocks is an OLD racers trick" In modern shocks, flipping them upside down is asking for problems. In the old days there is a good chance that the shocks were not even nitrogen charged. I do a lot of suspension work on VWs, dirt bikes and mini buggies and you NEVER flip the shock upside down. We have taken videos of KYB gas adjust shocks going though the bumps. They just do not have enough rebound dampening when the torsion bars get heavier or have a lot of preload. The ass end almost acts like a pogo stick and the wheels will leave the ground. If you want some shocks with good rebound dampening, get a set of bilstiens. They are well worth the money.
_________________
69 road Bug 2110
73 Squareback - 2L, T4, Automatic W/ AC
Gone, but many fond memories 69 Baja Bug 2010 - 5 Rib Bus Transaxle
Gone but not forgotten 72 Baja Bug 2010
My builds
T4 into Squareback http://www.thesamba.com/vw/forum/viewtopic.php?t=458944&highlight=
Auto Trans Rebuild http://www.thesamba.com/vw/forum/viewtopic.php?t=516066&highlight=
AC in Squareback https://www.thesamba.com/vw/forum/viewtopic.php?t=...highlight=
Back to top
View user's profile Send private message Gallery Classifieds Feedback
PhillipM
Samba Member


Joined: January 07, 2010
Posts: 594
Location: UK
PhillipM is offline 

PostPosted: Mon May 13, 2013 2:14 pm    Post subject: Reply with quote

You can turn a monotube, non-emulsion shock upside down with no issues.

A twin tube, or emulsion monotube, no, you'll just get gas pockets and no damping in the travel - nothing to do with oil the wrong side of the piston - oil should be both sides of it!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
john.saylor
Samba Member


Joined: January 30, 2012
Posts: 51

john.saylor is offline 

PostPosted: Mon May 13, 2013 6:00 pm    Post subject: Reply with quote

Since I re-indexed the outer one notch I sit about an eight inch from the stops and do like the ride with the exception of the pogo stick effect so a shock to control rebound sounds good, can you suggest a shock? you had mentioned bilstein, is there one in mind?
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> HBB Off-Road All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.