Author |
Message |
Octa Samba Member
Joined: March 15, 2004 Posts: 37 Location: Dubless in the city!
|
Posted: Tue Mar 08, 2005 8:52 pm Post subject: Bleeder Screw |
|
|
somebody a while back was asking about a source for replacement bleeder screws. In fact someone had used bus bleeder screws and now has two brake cylinders sans screws. I can't find the post. However, good news, somebody at the type3 list posted a site for parts, while I was browsing the site I found replacement bleeder screws. Here is the link, I hope it helps someone:
http://replacement.autopartswarehouse.com/parts/au...leed+Screw
_________________ ..We teach best what we most need to learn..
My old 71 Notch RHD |
|
Back to top |
|
|
Russ Wolfe Samba Member
Joined: October 08, 2004 Posts: 25187 Location: Central Iowa
|
Posted: Tue Mar 08, 2005 9:07 pm Post subject: |
|
|
Thanks for the post, but, What we were talking about was for the front wheel cylinders on an early T-3. '65 and newer. It has a much bigger bleader screw than that.
And I just did a search on that site for a bus bleeder screw, and they don't show one. They show the front wheel cylinders for the bus, but without the bleeder screws.....
http://replacement.autopartswarehouse.com/parts/au...l+Cylinder _________________ Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey
Gary: OK. Ima poop. |
|
Back to top |
|
|
|