Lifters and pushrod 36hp and Porsche pre A

[fcampbell356]

Can anyone post all of the different lifters and pushrods for the Porsche pre A, with in the 2-pc case? Is there much difference in the 36hp lifter and the Porsche pre A , also can lifter be reground?
Any answers?
Frank

[savaden]

I can't post any pictures, but the 36hp lifters are one piece with the pushrods, ground to a cam like profile, and have a flat on one side that aligns with a plate in the case. The 356 lifters are two-piece with the push rod. I don't know whether the lifter profile is the same as the 36hp.

SV

[fcampbell356]

SV
At least someone is looking at the question. There seems to be some modifications to the 36hp lifter to use longer pushrods when increasing the stroke. I was more looking for some of the guys on Vintage Speed to chime in. From all indications you can use the Pre A lifter in the 36hp case and adapt what ever length pushrod you need.
Well, on to something different.

Frank

[Braukuche]

[Jacks]

36 & Porsche 356 2 piece use the same lifter, and ,yes they can be reground. I would suggest this: http://www.thesamba.com/vw/classifieds/detail.php?id=1464067 with custom length separate pushrods.
_________________
Jack Staggs
Actual name

[fcampbell356]

Thanks Jack, I have looked into the Blackline lifters. A good option.
Who regrinds the 2pc Porsche lifters?
Frank