356ron Samba Member
Joined: June 14, 2012 Posts: 16 Location: Smiths Falls,Ontario,Canada
|
Posted: Fri May 30, 2014 5:14 pm Post subject: Looking for 1 or 2 356 C cylinder heads |
|
|
Having finished all my brake and suspension work and resolved a variety of electrical issues I removed the engine in my project 356 to replace the clutch, paint the tin and carry out general tune up work. I found that I have one cylinder head with wedges and one without. That would make one of the cylinder heads a B with smaller valves than the 616/15 C engine should have. Anyone have one or two spare C or even 912 cylinder heads available? Also have to resolve a lack of valve adjustment but feel I should start with rebuilding the heads through a knowledgeable 356 source.
Close to being on the road...
Ron |
|