Front trans mounts

Scott88ag · Posted: Mon Jul 21, 2014 6:51 am Post subject: Front trans mounts

Does anyone know the size of the nuts on the outer bolts of the front trans mount?
(1965 swingaxle)
The previous owner conveniently left them OFF!
Shocked

Dale M. · Posted: Mon Jul 21, 2014 7:54 am Post subject:

Believe they are 10mm....

Dale
_________________
“Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.

"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ...

Vanapplebomb · Posted: Mon Jul 21, 2014 8:07 am Post subject:

M10 x 1.5, but you will want to find the smaller 15mm nuts, not the typical 17. The 17mm socket will not fit between the ribs on the nosecone.
_________________
1800 Type 4 Berrien 295

http://www.thesamba.com/vw/forum/viewtopic.php?t=487021

Dale M. · Posted: Mon Jul 21, 2014 8:12 am Post subject:

Outer nuts.... Trans mount to chassis connection by what OP stated not mount to nosecone.... Box/Open end wrench fits just fine if you can not get socket in there.....

Dale
_________________
“Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.

"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ...

Vanapplebomb · Posted: Mon Jul 21, 2014 5:18 pm Post subject:

Nice catch Dale. I missed the word "outer." Laughing

_________________
1800 Type 4 Berrien 295

http://www.thesamba.com/vw/forum/viewtopic.php?t=487021


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> HBB Off-Road	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1