wood head liner

BZZBUG · Samba Member Joined: May 20, 2009 Posts: 62

Installed wood cab panels last night in 67 pop top. Rear and center panels next. My question is, does the center panel but up to the cab panels, or does it slide under or over them? I know it screws intio the lip on the tab at the back of the vent. Thanks

mandraks · Posted: Sat Jul 19, 2014 5:22 pm Post subject:

they don't overlap, there should be a trim piece
_________________
regards

Uli

----------------------------------------
'53 3-Fold Oval, L35 Metallic Blue, looking for a narrow hatch panel

srfndoc · Posted: Sat Jul 19, 2014 7:29 pm Post subject:

Correct, like these:

Image may have been reduced in size. Click image to view fullscreen.

http://www.thesamba.com/vw/classifieds/detail.php?id=1499451
_________________
RPM=(MPH*336* (R&P*4th*1.26))/Tire Diameter in inches

BZZBUG · Samba Member Joined: May 20, 2009 Posts: 62

Thanks for the responses. Where on the vent bow should the backside of the cab panels end, flush with the back edge or middle of the bow, or .... ? Mine are flush with the back edge of the vent bow. Do I need to trim them? Thanks

cru62 · Posted: Tue Jul 22, 2014 1:47 pm Post subject:

Middle of the bow with a tiny gap for the screw. You may have to cut a relief for the back of the vent. Go easy, 'cause it shows.
_________________
"My biggest worry is that when I die, my wife will sell all my parts for what I told her I paid for them"-Jon

Jokes about German sausage are the wurst.

Stop dead photo links! Post your photos to The Samba Gallery!

Clara · Samba Member Joined: June 14, 2003 Posts: 12399

The middle roof panel and the cab roof panels are cut differently for different years/ models.
If yours overlap, you are mixing and matching different versions.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Split Bus	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1