Author |
Message |
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
Posted: Sat Jul 05, 2014 4:07 am Post subject: |
|
|
Dustin B wrote: |
MonT3 wrote: |
Thought I'd post here as well as the other two wheeled trailer thread.
Has anyone found documentation on these trailers detailing which year the model and possibly the serial number were released? I've recently bought one which I pick up mid-month which has been off the road for a very long time and at the moment all I have is a model and serial number of 28761501. Serial # 4916. Any info is appreciated. |
I can't speek for all the trailers but mine is dated on the the factory vin tag. Mine is a 71 model year. |
Thanks Dustin B! Appreciate it and will be looking into it. _________________ MonT3
67 Squareback
64 Squareback
63 Squareback
Engine rebuild
Trailer rebuild |
|
Back to top |
|
|
splitnrag Samba Member
Joined: December 07, 2002 Posts: 149 Location: Tri-Cities, Washington
|
Posted: Sat Jul 05, 2014 6:38 pm Post subject: |
|
|
Can any of you show how you have your lights wired up? I'm just about ready to wire mine up. Thanks _________________ Insignificant Human with a couple of aircooled toys having adventures. Follow along on youtube.com/glennwhitcomb |
|
Back to top |
|
|
splitnrag Samba Member
Joined: December 07, 2002 Posts: 149 Location: Tri-Cities, Washington
|
Posted: Sat Jul 05, 2014 6:44 pm Post subject: |
|
|
Dustin B wrote: |
MonT3 wrote: |
Thought I'd post here as well as the other two wheeled trailer thread.
Has anyone found documentation on these trailers detailing which year the model and possibly the serial number were released? I've recently bought one which I pick up mid-month which has been off the road for a very long time and at the moment all I have is a model and serial number of 28761501. Serial # 4916. Any info is appreciated. |
I can't speek for all the trailers but mine is dated on the the factory vin tag. Mine is a 71 model year. |
I believe mine is a '75 according to the title. One thing that is different with mine is that my top is held up by two rods/roundbar not hinged hood-props. _________________ Insignificant Human with a couple of aircooled toys having adventures. Follow along on youtube.com/glennwhitcomb |
|
Back to top |
|
|
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
Posted: Sun Jul 20, 2014 8:08 am Post subject: |
|
|
Last week I made a trip to pick up a trailer I had found on CL. My investment wasn't much so my expectations weren’t very high. The images on the ad showed a rusty patina’d, dented up trailer which lived on farm for 40+yrs so I had a 50/50 shot. Being optimistic, I thought a few replacement panels and a good blasting would clean it up but rot in the framework under-side, sides panels, bed took away that thought as I looked at an improperly assembled trailer. The top cover screws and bolt was reversed. It really made me rethink about restoring it. I had to remove the fenders, axle and top cover to fit it into my truck bed (I have a Leer top on it) as the trailer wasn’t road worthy and couldn’t be towed. To me, this trailer is beyond restoration. After a good pressure wash, the rot began to reveal itself as well as the concrete still affixed to the bed and sides. The cover’s sides have some pitting and I’m not sure if they're salvageable. My intent has shifted to building a replica using this trailer as a template and using as many pieces I can remove from it which there are some. The remainder will be cut up and scrapped. Eventually, my home-made trailer will look very similar but have a few changes made to modernize it. In the meantime, I drug the ugly duckling under my deck where it’ll sit until I’m ready to disassemble it more, get my measurements and same pieces to get new stock and work on building it. So in the meantime, another project awaits…
_________________ MonT3
67 Squareback
64 Squareback
63 Squareback
Engine rebuild
Trailer rebuild |
|
Back to top |
|
|
Glenn A Samba Member
Joined: October 09, 2006 Posts: 986 Location: NY
|
Posted: Sun Jul 20, 2014 4:37 pm Post subject: |
|
|
Nice patina. The logos look great. Does it have a VIN plate above the tongue? _________________
mannys66 wrote: |
In all my years, I have never given one thought about a blow up doll's feelings, until today......I feel sorry for it. |
60 Double cab
65 EzCamper
66 Double cab
62 Kombi
2017 Golf R |
|
Back to top |
|
|
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
Posted: Sun Jul 20, 2014 5:18 pm Post subject: |
|
|
Glenn A wrote: |
Nice patina. The logos look great. Does it have a VIN plate above the tongue? |
Hi GlennA. Yes, the small VIN plate is on it. I got a bill of sale on this trailer as it sat on the farm forever after 1974. The seller couldn’t find the title to it which I felt was ok as I’d title my 63 squareback with just a bill of sale after it had sat in a field for 18yrs. However, my trip to the courthouse was a sour one as the gent I spoke with told me it couldn’t get a new title without the old title. After looking the trailer over, the underside is rotted pretty darn good where the framework meets the bed and other areas so keeping it is questionable. I feel building a new one using what I can from it with few mods will work out nice. BUT, I have to get new registration for my vehicles so I’m going to ask a few questions again and see where it goes. Maybe I’ll get a lady who’s sympathetic to my cause versus the guy that didn’t help. _________________ MonT3
67 Squareback
64 Squareback
63 Squareback
Engine rebuild
Trailer rebuild |
|
Back to top |
|
|
LHG Samba Moderator
Joined: April 13, 2000 Posts: 1855 Location: LostHillsGuy, CA
|
Posted: Sun Aug 10, 2014 10:12 am Post subject: Re: SEARS AllState Trailer |
|
|
Typ3nut wrote: |
Just Found !... SEARS AllState Clam Shell Trailer.
This thing has been in storage for over 25 years, super clean. Original Color was Grey and had a Black Racing Stripe down the middle of Top.
Original SEARS Stickers on sides. Was painted blue on bottom about 10 years ago.
Needs electrical to be rewired, longer Chains and Coupler.
Don't know if I just fix it up with new bearings and grease or if I want to repaint / restore. |
For a few years the tail lights were mounted on the lid as in the photo. The center light was added by someone. I recently found a 1970 trailer exactly like this one with OG light holes on the lid and the original owner said the lights were mounted there.
Question for Typ3nut: I don't see any wires coming down off the lid, can you tell where the wires went? _________________ Brian O'Kelly
Central Coast Chapter, CA - Vintage Volkswagen Club of America
www.centralcoastvwclub.com
www.facebook.com/groups/vintagevwclub/ |
|
Back to top |
|
|
Typ3nut Samba Member
Joined: October 08, 2002 Posts: 1192 Location: MI, MotorCity ManCave
|
Posted: Sun Aug 10, 2014 1:46 pm Post subject: Re: SEARS AllState Trailer |
|
|
LHG wrote: |
Typ3nut wrote: |
Just Found !... SEARS AllState Clam Shell Trailer.
This thing has been in storage for over 25 years, super clean. Original Color was Grey and had a Black Racing Stripe down the middle of Top.
Original SEARS Stickers on sides. Was painted blue on bottom about 10 years ago.
Needs electrical to be rewired, longer Chains and Coupler.
Don't know if I just fix it up with new bearings and grease or if I want to repaint / restore. |
For a few years the tail lights were mounted on the lid as in the photo. The center light was added by someone. I recently found a 1970 trailer exactly like this one with OG light holes on the lid and the original owner said the lights were mounted there.
Question for Typ3nut: I don't see any wires coming down off the lid, can you tell where the wires went? |
The wires ran inside, as there is an inside light also, along the top toward the front middle and out a hole in the lower middle where they tied the side marker running lights together and to the receiver hook-up.
When I restored, I didn't like the tail lights on the lid so, I relocated tail lights to lower sides and ran wiring inside square frame channel to conceal and give it a nicer look. |
|
Back to top |
|
|
LHG Samba Moderator
Joined: April 13, 2000 Posts: 1855 Location: LostHillsGuy, CA
|
Posted: Sun Aug 10, 2014 3:45 pm Post subject: |
|
|
Here is my addition to the Two Wheel Sears Trailer topic
Parked since 1986 in a shed.
Year - 6/1970
Condition - Good
Packed the wheel bearings, aired up the tires, wired the lights, and drove it 180 miles to the Airhead Parts Treffen XVI show in Oxnard Harbor.
A Nice Addition the owner installed. The little hoses on thefenders stick out far enough so you can see them when everything is straight. Good for backing up or just checking to see if the trailer is still back there. The also don't kill your knee when you bump into them.
Here's the tag over the tongue.
The Trailer
Stopping for a photo op along Hwy 1 and the Pacific Ocean.
We cruised out on the Santa Barbara Pier and State St on the way home
Me
_________________ Brian O'Kelly
Central Coast Chapter, CA - Vintage Volkswagen Club of America
www.centralcoastvwclub.com
www.facebook.com/groups/vintagevwclub/ |
|
Back to top |
|
|
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
|
Back to top |
|
|
LHG Samba Moderator
Joined: April 13, 2000 Posts: 1855 Location: LostHillsGuy, CA
|
Posted: Tue Aug 12, 2014 11:32 pm Post subject: |
|
|
MonT3 wrote: |
Cool trailer and you got it on the road quick. Looks like you have the mounting holes for the spare as well. Are you planning on restoring/rebuilding it? |
The P.O. moved the tire mount from the side to the tongue. It makes some sense having it there. The tail lights were also moved from the lid to the bed, another sensible move. No plans to restore it for now, I'm going to just use it for a while and enjoy the rust (patina ).
NOTE: I noticed my tag has the date stamped in the top right corner, any other tags with dates out there? _________________ Brian O'Kelly
Central Coast Chapter, CA - Vintage Volkswagen Club of America
www.centralcoastvwclub.com
www.facebook.com/groups/vintagevwclub/ |
|
Back to top |
|
|
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
Posted: Wed Aug 13, 2014 11:54 am Post subject: |
|
|
LHG wrote: |
MonT3 wrote: |
Cool trailer and you got it on the road quick. Looks like you have the mounting holes for the spare as well. Are you planning on restoring/rebuilding it? |
The P.O. moved the tire mount from the side to the tongue. It makes some sense having it there. The tail lights were also moved from the lid to the bed, another sensible move. No plans to restore it for now, I'm going to just use it for a while and enjoy the rust (patina ).
NOTE: I noticed my tag has the date stamped in the top right corner, any other tags with dates out there? |
That's cool.
There's an ad, same trailer:
https://columbus.craigslist.org/for/4613595734.html
http://www.thesamba.com/vw/classifieds/detail.php?id=1645601
One of the pics on the CL ad has a sticker/tag which has a manufacture date on it. I don't know where this sticker would have been placed on the trailer. My trailer doesn't have this tag. It's pretty weathered and I can only imagine if it did, the sticker peeling off after a couple MN winters while on a farm.
I searched the gallery for other markings or differences between these trailers to pinpoint the year mine was made. Only thing I can find is the top covers side panels. Some have horizontal lines while others have an "X" pattern. Not sure if the "Allstate" markings were standard placement on each one or not. I checked the small VIN/SN plate after you brought to my attention where that could be. Interestingly, my plate does not have a date stamp on it. Just a model and serial number. _________________ MonT3
67 Squareback
64 Squareback
63 Squareback
Engine rebuild
Trailer rebuild |
|
Back to top |
|
|
Red Fau Veh Samba Member
Joined: September 07, 2012 Posts: 3037 Location: Prescott Az.
|
Posted: Sun Oct 26, 2014 11:43 pm Post subject: |
|
|
Here is one.
_________________ 1971 Deluxe Sunroof Bay 1905 stroker, dual idf40's, 74mm Scat forged crank, engle 110 cam. CB 044 heads, AutoCraft rockers, chromoly push rods
1973 Orange transporter stock type 4 with dual 40 Dellortos and Empi single quiet pack
1969 Adventurewagen blue whale Gene Berg 1776 built by Dave Kawell dual 36 DRLA's, Vintage Speed exhaust, Bosch 019 screamer
1961 Swivel Seat camper, L345 grey
Touch Nicks Thing wrote: |
Swivel Seat panels are for people with no friends |
|
|
Back to top |
|
|
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
Posted: Mon Oct 27, 2014 6:01 am Post subject: |
|
|
If possible, can close ups of the spare tire mount be posted along with the support bars for the cover? I'm searching for some alternatives and would like to get as close as possible. OR if anyone knows of other sources to possibly get parts for these? Sears boasts a parts site that posts pieces for these trailers but they're mainly nuts and bolts that can be gathered elsewhere. I haven't started working on my mine yet as my square is in a rebuild state but just collecting bits for it. Thanks! _________________ MonT3
67 Squareback
64 Squareback
63 Squareback
Engine rebuild
Trailer rebuild |
|
Back to top |
|
|
mustangfanatic Samba Member
Joined: August 10, 2015 Posts: 1 Location: Charlotte
|
Posted: Mon Aug 10, 2015 7:56 am Post subject: |
|
|
My dad has a Sears trailer sitting in his back yard and I want to get it back on the road. My issue is the axle is frozen, wheels won't turn. It has been parked for years. Does anyone know the axle width in case I need to replace the entire axle? If anyone has done this, any suggestions on where to source a new axle? Thanks very much! |
|
Back to top |
|
|
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
Posted: Mon Aug 10, 2015 10:41 pm Post subject: |
|
|
mustangfanatic wrote: |
My dad has a Sears trailer sitting in his back yard and I want to get it back on the road. My issue is the axle is frozen, wheels won't turn. It has been parked for years. Does anyone know the axle width in case I need to replace the entire axle? If anyone has done this, any suggestions on where to source a new axle? Thanks very much! |
Is your axle have a hub on it with lugs or a spindle that mounts to a single hole/lug wheel?
Since I’ve torn down my trailer and have been sourcing parts, I found out the axle is a ¾ in spindle. My trailer has a single-hole mount on the axle spindle versus some that may have a hub with 4 lugs. I went searching for wheels as mine are rotted beyond repair so I began to look at an upgrade for my existing axle. I searched for a replacement axle and found some rated at 2000lbs or more but the trailer is, as I understand it rated at ½ ton. So I thought any other axle may be overkill and I could try to work with what I have. I plan cutting out the ¾” spindle and have a 1 1/16th spindle welded in then add 5 lug hubs so I have access to the newer wheels and parts.
Have you tried removing your wheels to see if the maybe you can replace the bearings or wheels if you have to? Post some pics as I’m sure some of the other owners may have some more insight into what you may be facing. _________________ MonT3
67 Squareback
64 Squareback
63 Squareback
Engine rebuild
Trailer rebuild |
|
Back to top |
|
|
Minnesota_Duane Samba Member
Joined: September 16, 2010 Posts: 3 Location: Climax, Mn
|
Posted: Sat Jul 16, 2016 11:14 am Post subject: Re: Sears allstate two wheeler. |
|
|
|
|
Back to top |
|
|
Red Fau Veh Samba Member
Joined: September 07, 2012 Posts: 3037 Location: Prescott Az.
|
Posted: Sun Jul 17, 2016 12:01 pm Post subject: Re: Sears allstate two wheeler. |
|
|
Bitchen dude! _________________ 1971 Deluxe Sunroof Bay 1905 stroker, dual idf40's, 74mm Scat forged crank, engle 110 cam. CB 044 heads, AutoCraft rockers, chromoly push rods
1973 Orange transporter stock type 4 with dual 40 Dellortos and Empi single quiet pack
1969 Adventurewagen blue whale Gene Berg 1776 built by Dave Kawell dual 36 DRLA's, Vintage Speed exhaust, Bosch 019 screamer
1961 Swivel Seat camper, L345 grey
Touch Nicks Thing wrote: |
Swivel Seat panels are for people with no friends |
|
|
Back to top |
|
|
JoelH Samba Member
Joined: October 16, 2003 Posts: 1312 Location: North Dakota
|
|
Back to top |
|
|
MonT3 Samba Member
Joined: January 07, 2012 Posts: 1988 Location: South Dakota
|
Posted: Wed Jun 28, 2017 7:05 am Post subject: Re: Sears allstate two wheeler. |
|
|
JoelH wrote: |
For those that have swapped the original rims with new hubs and then bolt on rims, what hubs are you buying? 3/4" shaft on mine. Hard to find parts. Anyone have a good original rim they would sell? Then I wouldn't have to find hubs. Thanks |
You can pick up a set of spindles and hubs kits as well as wheels from your local Tractor Supply, Runnings or order them online. I replaced my spindles for the same reason as my wheels were so rotted they were a safety hazard. I've read on another trailer thread, might have been a single wheel one where the owner found a wheel similar to the no lug, center spindle nut mounted wheel. _________________ MonT3
67 Squareback
64 Squareback
63 Squareback
Engine rebuild
Trailer rebuild |
|
Back to top |
|
|
|