Author |
Message |
speedjeans76 Samba Member
Joined: August 09, 2005 Posts: 39
|
Posted: Sun Aug 24, 2014 2:38 pm Post subject: slamming a porsche 912 to the ground |
|
|
Are there any people that have lowered their 912.
I know you can do a few mm by raising the spindle on the strut.
Maybe some shorter shocks/strutts.
But are there any REAL LOW 912/911 around? if so, how are they lowered?
What is the maximum you can lower?
thanks for the info (mine is waiting to be lowered) |
|
Back to top |
|
|
HarryFD Samba Member
Joined: February 24, 2012 Posts: 746 Location: Portland, OR
|
Posted: Tue Aug 26, 2014 9:08 pm Post subject: |
|
|
You lower the car by reindexing the front and rear torsion bars. However, you will need to make other suspension mods to control bump steer (most likely raised spindles, you will need modified shocks, etc.). when done, your will need to corner balance and align the whole thing.
A race shop that sets up 911 will know exactly what to do. _________________ 1970 Deluxe Sunroof Bay Brilliant Blue/Cloud White
1973.5 911 Targa
2009 MB C300 |
|
Back to top |
|
|
SzaboZoli Samba Member
Joined: May 29, 2014 Posts: 84
|
Posted: Fri Aug 29, 2014 5:24 am Post subject: Re: slamming a porsche 912 to the ground |
|
|
speedjeans76 wrote: |
Are there any people that have lowered their 912.
I know you can do a few mm by raising the spindle on the strut.
Maybe some shorter shocks/strutts.
But are there any REAL LOW 912/911 around? if so, how are they lowered?
What is the maximum you can lower?
thanks for the info (mine is waiting to be lowered) |
That's a good question. Reply rather than an image:
|
|
Back to top |
|
|
|