RFV
Samba Member
Joined: November 03, 2004
Posts: 92
Location: Texas
|
 Posted: Tue Oct 21, 2014 7:45 pm Post subject: type 3 crank pulley nut size? |
 |
|
| I tried getting my 30mm socket on the nut, but couldn't get it on. Engine is in car and I can't see what I'm doing, just going by feel. Car has been sitting forever and I'm want to see if the motor will turn. The is my first type 3, is this the right socket or do I need bigger? |
|
flyinglow94
Samba Member
Joined: January 17, 2005
Posts: 1165
Location: Las Vegas, Nevada
|
| Posted: Tue Oct 21, 2014 11:20 pm Post subject: |
|
|
Check, There should be a cap that is removed before you can get the socket on the nut.
_________________
"What we obtain too cheap, we esteem too lightly: 'tis dearness only that gives everything its value. Heaven knows how to put a proper price upon its goods; and it would be strange indeed if so celestial an article as FREEDOM should not be highly rated."
"Socialism is a philosophy of failure,the creed of ignorance, and the gospel of envy,its inherent virtue is the equal sharing of misery.." |
|
