rear cage mount

bigfatloser · Posted: Sun Oct 26, 2014 9:07 am Post subject: rear cage mount

Curious if there is a third mount/bolt to the case behind the full flow fitting? Cannot seem to find a picture from another angle, and my case has nothing in that location to attach to.

Image may have been reduced in size. Click image to view fullscreen.

_________________
DMZFAB.COM

Brian · Posted: Sun Oct 26, 2014 9:20 am Post subject:

That is a dope mount, but probably puts an okay amount of stress on the case.

Its a tall pump, so there probably is a bolt behind it.
_________________
Wash your hands

'69 Bug
'68 Baja Truck
'71 Bug
'68 Camper

Only losers litter

bigfatloser · Posted: Sun Oct 26, 2014 10:23 am Post subject:

Agreed. I would most likely not go the solid route.
_________________
DMZFAB.COM

Brian · Posted: Sun Oct 26, 2014 10:29 am Post subject:

I'd fab up something to accept those generic use urethane mounts.

But that whole getup seems like its not really needed if you have a mid-mount.
_________________
Wash your hands

'69 Bug
'68 Baja Truck
'71 Bug
'68 Camper

Only losers litter

winchin73blazinbaja · Posted: Mon Oct 27, 2014 12:16 pm Post subject:

it very easily could be rubber mounted to the cage if you look closely at where it mounts just run the engine mount there


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> HBB Off-Road	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1