Author |
Message |
andy198712 Samba Member
Joined: December 05, 2010 Posts: 1209 Location: Cornwall - UK
|
Posted: Sat Dec 20, 2014 5:54 am Post subject: Who sells Porsche shrouds? |
|
|
Does anyone know a place that sells JUST the porsche shroud for a type 1, got a Porsche ring and fan unit so i can make it full size or 260mm but not 240mm
also i'm in the uk so thats a consideration.
I've seen some from the likes of CSP ect but i was looking at about £150 or less (delivered ideally) or less second hand.
if i have to i'll just have to cough up the extra but id rather not if i don't have to!
Cheers
Andy
PS i'm not interested in opening a debate about the style and effectiveness of cooling, i'm well educated in that matter _________________
Alstrup wrote: |
I like 5,5inchers in the rear at least. |
|
|
Back to top |
|
|
raul arrese Samba Member
Joined: July 23, 2006 Posts: 1329 Location: miami florida
|
|
Back to top |
|
|
itHaKa Samba Member
Joined: February 20, 2008 Posts: 254 Location: Argentina
|
Posted: Sat Dec 20, 2014 8:09 am Post subject: |
|
|
i bought from Sharpbuilt in Australia and
Gerd Wiser Dusseldorf (GWD) from Germany
Sharbuilt kit is for standard 270mm fan housing , for GWD they can provide 270mm , 260mm
The 240mm is not a genuine Porsche housing
in your country you could ask la performance
http://www.laperformance.co.uk/blog/
sorry, but with your budget it will be difficult, keep an eye on ebay for a used one. _________________ 76x88 , 1849cc engine build :
http://mundoescarabajo.com.ar/me/viewtopic.php?t=635 |
|
Back to top |
|
|
andy198712 Samba Member
Joined: December 05, 2010 Posts: 1209 Location: Cornwall - UK
|
Posted: Sat Dec 20, 2014 10:38 am Post subject: |
|
|
raul arrese wrote: |
Check here on the classifieds , they show up all the time . |
yeah i keep an eye on them, couple on there at the min are for kits or T4, but i'll keep looking _________________
Alstrup wrote: |
I like 5,5inchers in the rear at least. |
|
|
Back to top |
|
|
andy198712 Samba Member
Joined: December 05, 2010 Posts: 1209 Location: Cornwall - UK
|
Posted: Sat Dec 20, 2014 10:44 am Post subject: |
|
|
itHaKa wrote: |
i bought from Sharpbuilt in Australia and
Gerd Wiser Dusseldorf (GWD) from Germany
Sharbuilt kit is for standard 270mm fan housing , for GWD they can provide 270mm , 260mm
The 240mm is not a genuine Porsche housing
in your country you could ask la performance
http://www.laperformance.co.uk/blog/
sorry, but with your budget it will be difficult, keep an eye on ebay for a used one. |
Sharpbuilt only seem to do the kits, which is fair enough as you need there stand also due to using full size rings, and postage might be a bit extreme given it couldn't be further away, but the exchange rate is good so....?
Will look up GWD and see if they have a site ect.
i did buy a shroud which looked like the CSP one, but it was 240mm, as you say, thats a repro ring and you can't physically make a Porsche ring that small.
Yeah LA performance is my option if i can't find one cheaper, theirs are £180 for grp and £280 for carbon fibre an about £35 postage.
The thing that gets me is there just a shroud, empty and probably not that expensive to make (but its overheads ect i know)
i got lucky and got my fan ring and alt for £100, so i'm ahead of the game anyway and its an opportunity i can't miss up!
Thanks for the info, will try gad next _________________
Alstrup wrote: |
I like 5,5inchers in the rear at least. |
|
|
Back to top |
|
|
itHaKa Samba Member
Joined: February 20, 2008 Posts: 254 Location: Argentina
|
|
Back to top |
|
|
|