4x100 pattern on a 66 type 3

hctran · Samba Member Joined: February 06, 2015 Posts: 7

What is the best way to convert my current 4x130 pattern to 4x100? I found a set i really like:

Rim Diameter: 15
Number of Bolts: 4
Bolt Pattern: 4x100/4x114.3
Offset (mm): 40

thanks everyone !

911pickup · Posted: Mon Mar 02, 2015 9:30 am Post subject:

You could get your drums re-drilled for a 4x100 bolt pattern, or go with adapters (which I wouldn't recommend).
Cip1 also sells 4x100 drilled drums:
http://www.cip1.ca/SearchResults.asp?search=4x100+drums&Submit=

hctran · Samba Member Joined: February 06, 2015 Posts: 7

thanks

will it fit with a 66 type 3 .

Erik G · Posted: Mon Mar 02, 2015 10:42 am Post subject:

Mike Fisher · Posted: Mon Mar 02, 2015 11:23 am Post subject:

Your local Machine Shop can accurately drill them to 4X100.
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Custom Wheel/Tire	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1