Author |
Message |
PTL&PTA Samba Member
Joined: November 19, 2014 Posts: 18 Location: England
|
Posted: Thu Jul 02, 2015 12:49 am Post subject: Instrument Bezels |
|
|
Is it possible to swop a triangular (more traditional) bezel on to the "Viewline Series" instrument gauge/gage?
I've spotted a - so far - cheap, new VDO "Viewline" gauge on Ebay.
It's just that I prefer the triangular bezel myself.
Thanks All!
SMILE!
.02¢
Stephan Kassner
I don't really weiß nix WHAT I'm doin'!
Last edited by PTL&PTA on Fri Jul 03, 2015 12:04 am; edited 1 time in total |
|
Back to top |
|
|
PTL&PTA Samba Member
Joined: November 19, 2014 Posts: 18 Location: England
|
Posted: Fri Jul 03, 2015 12:00 am Post subject: |
|
|
Well I believe I can answer my own question.
After what seemed like a complete waste of time searching, I came across this site:
https://www.merlinmotorsport.co.uk/p/vdo-chrome-bezel-to-suit-52mm-viewline-gauges-a2c53186
It would appear that the bezels CAN be swapped but "probably" not with the "classic gauge" bezel. It looks like the inner profile of the bezel is more complicated in the Viewline lgauges.
Don't know if this info is any use to anyone else but it seemed to clarify it for me.
Back to the drawing board . . .
Thanks All!
SMILE!
.02¢
Stephan Kassner
I don't really weiß nix WHAT I'm doin'! |
|
Back to top |
|
|
|