Photo of original wheel well area

[Angus Dowrie]

Hi

I am looking for a photo showing the detail in the lower areas of the wheel well area. I just want to make sure I have all the correct components like jack supports, wiring support etc

This angle, but a little wider in perspective - this cuts off the edges a little for what I'm after. Looking for a known original car.

Any help appreciated, mine is a late '62 build, early '63 model year.

[rcooled]

This is the left-side of the tire well area in my '67. It's all original, just as it left the factory, although a bit dirtier.

_________________
'63 Ragtop (current)
'65 Ghia coupe (totaled)
'67 Ghia convertible (current)
'69.5 Ghia convertible and
'62, '63, '65, '69 Bugs (all long gone)

[Angus Dowrie]

Thanks rcooled, if the rest of your car is that good you are very lucky!

If its not too much trouble, could I ask you to take a similar photo of the right side, and a central shot as well? Would be much appreciated.

For instance on that silver centred shot I posted, there is a wire support for the horn wires, it is just out of shot in yours. And I don't know what the tall thing is to the right of the horns. The shorter triangular support further to the right is the jack support.

[Mellow Yellow 74]

[Angus Dowrie]

Thanks for that, I'd never seen one before. But my current '63 is the newest Ghia I've ever had!

[Rome]

Here you go, Angus. From my original paint (L87 Pearl White) '64 Ghia cabrio. Scrubbed the area with SimpleGreen, and touched up some of the rust with Photoshop paint . The blue container at the bottom (frontward) of the horns is the electric washer bottle from a gen-1 Scirocco. Additional red and white wires are for the washer bottle, as well as for driving lights.

And from my gallery, a few months ago, the right side:

[Angus Dowrie]

Thank you Rome, much appreciated!