Author |
Message |
MotoMike Samba Member
Joined: June 13, 2013 Posts: 120 Location: Durango, CO
|
Posted: Tue Nov 24, 2015 12:46 pm Post subject: Super Beetle on standard pan? |
|
|
I have 72 Baja that is really rusty and someone just gave me a 72 super, will the super bolt on the standard pan from the bulkhead back? I plan on cutting it for a one piece front, and I know the Mc strut stuff is not compatible normally. |
|
Back to top |
|
|
Iguana Samba Member
Joined: April 19, 2008 Posts: 922 Location: SOCAL
|
Posted: Tue Nov 24, 2015 2:42 pm Post subject: Re: Super Beetle on standard pan? |
|
|
MotoMike wrote: |
I have 72 Baja that is really rusty and someone just gave me a 72 super, will the super bolt on the standard pan from the bulkhead back? I plan on cutting it for a one piece front, and I know the Mc strut stuff is not compatible normally. |
Will it bolt on completely - NO
Will it Fit and work fine - Yes
The front two larger bolts on the outside of the frame head are in a different place on the super at approx 100mm wider
Tunnel shape is the same
Super has a large bracket which bolts to the top of the tunnel next to the pedals that option isn't there on a stock pan so you need to either make it work or just ignore it. It is needed for Mac Strut not Beam anyway.
Pan Halves are the same
Rear Section is the same |
|
Back to top |
|
|
MotoMike Samba Member
Joined: June 13, 2013 Posts: 120 Location: Durango, CO
|
Posted: Tue Nov 24, 2015 2:54 pm Post subject: Re: Super Beetle on standard pan? |
|
|
Thanks for the info |
|
Back to top |
|
|
|