Author |
Message |
Bogmic Samba Member
Joined: January 26, 2016 Posts: 5 Location: Hawaii
|
Posted: Tue Jan 26, 2016 6:22 pm Post subject: How do i install my oil slinger ring and rubber ring? |
|
|
I have a 1984 water cooled VW 1900cc. I am attempting to install my oil slinger ring. it has been a year since I took it apart. The pictures i took are gone. There is a oil slinger ring that is slightly concave. There is a rubber o-ring that goes with it. The woodruff key is cut off on on end. It appears this was done to make room for the rubber o-ring next to the oil slinger ring. What order do I put these in. Which way does the woodruff key face. Thank you for your help.
|
|
Back to top |
|
|
TDCTDI Samba Advocatus Diaboli
Joined: August 31, 2013 Posts: 12846 Location: North Carolina
|
Posted: Tue Jan 26, 2016 7:58 pm Post subject: Re: How do i install my oil slinger ring and rubber ring? |
|
|
While yours is watercooled, your question would get a quicker/more accurate answer in the vanagon section. _________________ Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.
GOFUNDYOURSELF, quit asking everyone to do it for you!
An air cooled VW will make you a hoarder.
Do something, anything, to your project every day, and you will eventually complete it. |
|
Back to top |
|
|
Bogmic Samba Member
Joined: January 26, 2016 Posts: 5 Location: Hawaii
|
Posted: Tue Jan 26, 2016 8:14 pm Post subject: Re: How do i install my oil slinger ring and rubber ring? |
|
|
Thank you for your help. I have reposted in the Vanagon forum. |
|
Back to top |
|
|
|