| Author |
Message |
ceburn2
Samba Member
Joined: March 28, 2016
Posts: 15
Location: Killen, Al.
|
 Posted: Mon Apr 25, 2016 8:11 am Post subject: messed up |
 |
|
I bought a sand rail on craigslist supposing 3 rib bus transaxle that was built, and modified for a mid engine. I have been talking to the guy for 2 weeks. He seemed to be honest, and I thought we were straight. He brought it to me yesterday 7 hour drive. On first look I could tell this was a beetle transaxle. I believed him when he said that he was told it was a 3rib bus. Unless there is a bus transaxle that is shaped like a beetle. I wanted to back out, and maybe I should have. Now I have another swing axle rail, and every 091 I find is irs. I would like to believe that we live and learn. But, apparently that doesn't apply to me.  |
|
| Back to top |
|
 |
Dale M.
Samba Member
Joined: April 12, 2006
Posts: 20379
Location: Just a tiny bit west of Yosemite Valley
|
| Posted: Mon Apr 25, 2016 8:21 am Post subject: Re: messed up |
|
|
Pictures...
Dale
_________________
“Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
| Back to top |
|
|
ceburn2
Samba Member
Joined: March 28, 2016
Posts: 15
Location: Killen, Al.
|
| Posted: Mon Apr 25, 2016 9:01 am Post subject: Re: messed up |
|
|
| I have got to learn how to post pictures. I have Neal petal's that has Hydraulic lines that go to the carburetor's, and I have no ideal how to hooks that up. The petal base is made so that you can adjust them, but they should have some kind of pull up spring loaded pins. |
|
| Back to top |
|
|
ceburn2
Samba Member
Joined: March 28, 2016
Posts: 15
Location: Killen, Al.
|
| Posted: Mon Apr 25, 2016 9:02 am Post subject: Re: messed up |
|
|
| I have got to learn how to post pictures. I have Neal petal's that has Hydraulic lines that go to the carburetor's, and I have no ideal how to hooks that up. The petal base is made so that you can adjust them, but they should have some kind of pull up spring loaded pins. |
|
| Back to top |
|
|
ceburn2
Samba Member
Joined: March 28, 2016
Posts: 15
Location: Killen, Al.
|
| Posted: Mon Apr 25, 2016 9:37 am Post subject: Re: messed up |
|
|
| the transaxle code in D0201 which I don't find on any of the charts. |
|
| Back to top |
|
|
B Ramsey
Samba Member
Joined: February 05, 2006
Posts: 477
Location: Ramona ca.
|
| Posted: Tue Apr 26, 2016 4:26 pm Post subject: Re: messed up |
|
|
must be Tuesday.
_________________
Go outside and do something. |
|
| Back to top |
|
|
|
