Author |
Message |
noslocars Samba Member
Joined: March 09, 2010 Posts: 250 Location: Salt Lake City
|
Posted: Fri Oct 18, 2013 7:21 pm Post subject: |
|
|
webberjames95 wrote: |
insane68 wrote: |
webberjames95 wrote: |
Zach Thomas wrote: |
webberjames95 wrote: |
stock beam. friends bug.
|
I don't think that's a stock beam. But I like it A little extreme on the rear, how wide are those steelies? |
It's not mine. But a friends. It is stock beam. He takes pride in having a super low stock beam bug. I believe 8 in the rear. Those are bus rims in the front. Only adjusters and dropped spindle in front |
so i found a person who had a bug this model, stock beam, bus rims, drop spindles and adjusters, had to take it back apart and narrow the beam because the fenders were sitting on the tires, so this is a narrowed beam in this picture. physics never lie.... |
I can guarantee this is a stock beam. this is babyblue60's bug. builders never lie.
http://www.thesamba.com/vw/forum/viewtopic.php?t=199657&start=40
check it out yo. |
I want to see a tape measure picture measuring the beam. Guess I lived in the show me state for too long. _________________ Current projects:
http://noslocars.blogspot.com/ |
|
Back to top |
|
|
bug59 Samba Member
Joined: November 03, 2003 Posts: 66 Location: belgium
|
Posted: Sat Oct 19, 2013 1:47 pm Post subject: |
|
|
Mine is stock width with adjusters and drop spindles,135 smart tyre
gtz _________________ vw bug 59
vw jetta 83 |
|
Back to top |
|
|
shano63 Samba Member
Joined: October 06, 2006 Posts: 3596 Location: Stormville NY
|
Posted: Sat Oct 19, 2013 3:12 pm Post subject: |
|
|
Just adjusters...155/80s on 5.5in rim. Rear is untouched...
_________________ 63 T1 Ragtop Gulf Blue
08 Civic 5spd
22 Wrangler 6spd
78 F250 4x4 4spd
Chris
Take it as it comes-- Morrison |
|
Back to top |
|
|
ATHAFA Samba Member
Joined: May 26, 2014 Posts: 4 Location: Louisiana
|
Posted: Mon May 26, 2014 9:02 pm Post subject: . |
|
|
This worked for me. Not a bit of rub, even with aggressive driving.
77 beetle
dropped spindles(lowers 2.5 inch) with drum
one rear outer
The KYB Gas-a-Just front(raises 1 inch) and rear(raises a bit ?)
155/80/15 all four
EMPI Sprintstar
Wheel Width: 5 in.
Backspacing: 3.98 in.
Offset: +25 mm
|
|
Back to top |
|
|
vugbug68 Samba Member
Joined: June 25, 2006 Posts: 2696 Location: sacramento
|
Posted: Tue May 27, 2014 12:07 am Post subject: |
|
|
Friends 71 with 2.5 drop spindles and disc brakes, 155/60/15 up front
Old pic of my old 68, 2.5 drop spindles, stock drums, 195/50/15 up front
_________________ 71 Super - Backroad Thrasher
66 Corvair - Weekend Cruiser
90 4 Runner - Muddin |
|
Back to top |
|
|
dropped65 Samba Member
Joined: July 21, 2007 Posts: 384 Location: mass
|
Posted: Sat Jun 07, 2014 6:09 am Post subject: |
|
|
2in widefive dropped spindles stock rear
175/65r15 front 195/60r15 rear |
|
Back to top |
|
|
sixfootdan Samba Smartass
Joined: February 13, 2002 Posts: 4848 Location: \Lo*ca"tion\, n. 1. The act or process of locating.
|
Posted: Sun Jun 08, 2014 5:49 am Post subject: |
|
|
Just a stock width beam with adjusters and 135's, Going to lower the back a little bit. _________________ Schrodinger's cat walked into a bar and it didn't.
GO SEAHAWKS!!! |
|
Back to top |
|
|
61Whitebeetle Samba Member
Joined: November 19, 2007 Posts: 10 Location: uk
|
Posted: Sat Jan 31, 2015 1:43 pm Post subject: |
|
|
my 61 has a 2" narrowed beam but with drop spindles and CSP disc brakes making the track near standard width.
|
|
Back to top |
|
|
VOLKSWAGNUT Fastest VW Belt Changer
Joined: October 14, 2007 Posts: 11056 Location: Flippin' a Belt........ .... Off-n-On ... NC USA
|
Posted: Sun Feb 01, 2015 8:21 am Post subject: |
|
|
VOLKSWAGNUT wrote: |
Specs:
1967 Beetle
Stock transaxle (long axles)
Eagle Alloy 5 spokes. 15 x 5.5
Rear: Original unchanged ride height 185/65/15 tires
Front: Lowered front with CIP1 purchased spindles 1/4 offset and torsion adjusters welded in a stock length beam. 1 set of Caster shims and long beam bolts.
Front beam is 3 inches off the ground. 155/60/15 tires.
Nice mild raked look, they way I like it. It rides, drives and handles great. I hope these reference pics helps some other owners/builders.
|
Same car... same setup.. but with 15x4 stock 67 wheels..
Wheel change...in hopes it will help the sale..
.[/quote] _________________ aka Ken {o\!/o}
Its your vehicle- stop askin' for approval-do what YOU like for cryin' out loud
Better to roll em' how you want and wear em' out-than lettin' em' rot out
Its about the going not the showing
Rebuilt to drive not decorate
WANTED: Local Eatin' Joints, Triple D for TheSamba contributions here http://www.thesamba.com/vw/forum/viewtopic.php?t=570510
Search "VOLKSWAGNUT" on YouTube since you cant watch a "certain" BELT change video round here
Usually and often edited |
|
Back to top |
|
|
Higgy69 Samba Member
Joined: September 30, 2013 Posts: 10 Location: Kentucky
|
Posted: Sun Feb 01, 2015 12:06 pm Post subject: |
|
|
This was mine on stock width beam, I did go to a 4" narrow beam.
And narrowed
|
|
Back to top |
|
|
ol puddin head Samba Member
Joined: April 03, 2011 Posts: 50 Location: somerset ky
|
Posted: Sun Feb 01, 2015 1:13 pm Post subject: |
|
|
Higgy69 wrote: |
This was mine on stock width beam, I did go to a 4" narrow beam.
And narrowed
|
needs centerlines......and vintage fenders. _________________ Tired Arms...Achy Knees...Greasy, Bloody Knuckles
Nothing Says Weekend Fun Like A Full Restoration |
|
Back to top |
|
|
Higgy69 Samba Member
Joined: September 30, 2013 Posts: 10 Location: Kentucky
|
Posted: Sun Feb 01, 2015 1:34 pm Post subject: |
|
|
ol puddin head wrote: |
needs centerlines......and vintage fenders. |
Can't run centerlines here, some dude around Somerset hoardes all of the vintage centerlines up |
|
Back to top |
|
|
mellowcmb Samba Member
Joined: October 12, 2014 Posts: 3 Location: South Pasadena, Ca
|
Posted: Thu Feb 05, 2015 6:43 pm Post subject: |
|
|
Front slightly lowered on stock beam. |
|
Back to top |
|
|
Babyblue60 Samba Member
Joined: April 18, 2012 Posts: 49 Location: Puyallup,wa
|
Posted: Fri Jul 31, 2015 10:31 am Post subject: |
|
|
noslocars wrote: |
webberjames95 wrote: |
insane68 wrote: |
webberjames95 wrote: |
Zach Thomas wrote: |
webberjames95 wrote: |
stock beam. friends bug.
|
I don't think that's a stock beam. But I like it A little extreme on the rear, how wide are those steelies? |
It's not mine. But a friends. It is stock beam. He takes pride in having a super low stock beam bug. I believe 8 in the rear. Those are bus rims in the front. Only adjusters and dropped spindle in front |
so i found a person who had a bug this model, stock beam, bus rims, drop
,had to take it back apart and narrow the beam because the fenders were sitting on the tires, so this is a narrowed beam in this picture. physics never lie.... |
I can guarantee this is a stock beam. this is babyblue60's bug. builders never lie.
http://www.thesamba.com/vw/forum/viewtopic.php?t=199657&start=40
check it out yo. |
I want to see a tape measure picture measuring the beam. Guess I lived in the show me state for too long. |
This is my car. Stock with beam with adjusters. 2 1/2 drop spindles on bus wheels 165/45/15 tire. Read was 2 1/2 drop plates on 15x8s on 185/50/15 tire
Flat bottom panes. It no longer has that beam due to running 17" iozzio Cosmics with 944 hubs on Lp drop spindles and 17x10 rears |
|
Back to top |
|
|
mnelsonvw Samba Member
Joined: December 29, 2007 Posts: 121 Location: Baltimore MD
|
Posted: Tue Aug 04, 2015 3:40 am Post subject: |
|
|
Dropped Spindles only on the front, one spline on the rear. _________________ MattyMatt
73 standard beetle |
|
Back to top |
|
|
Dirty Hippie Samba Member
Joined: July 19, 2007 Posts: 189 Location: Huntsville, Alabama
|
Posted: Fri Aug 07, 2015 5:49 pm Post subject: |
|
|
|
|
Back to top |
|
|
HotWhls Samba Member
Joined: December 01, 2006 Posts: 82 Location: North Carolina
|
Posted: Sat Aug 08, 2015 7:02 am Post subject: |
|
|
1968 with stock width beam, adjusters and 195/50 tires on 15 X 5.5 rims.
_________________ Jesus Saves |
|
Back to top |
|
|
vdub8 Samba Member
Joined: February 24, 2007 Posts: 125 Location: SLC, UT
|
|
Back to top |
|
|
BerylGreen63 Samba Member
Joined: July 17, 2010 Posts: 392 Location: San Diego
|
Posted: Tue Aug 11, 2015 3:39 pm Post subject: |
|
|
2.5 drop spindles and 175/55/15 tires
2.5 drop Spindles and 145 R15 tires
|
|
Back to top |
|
|
Motor60 Samba Member
Joined: July 13, 2014 Posts: 625 Location: SoCal
|
Posted: Sat May 28, 2016 6:56 pm Post subject: |
|
|
mnelsonvw wrote: |
Dropped Spindles only on the front, one spline on the rear. |
does anyone know this guy or bug? Im having an issue fitting my 2 Liter wheels on my 1970 bug...with drop spindles only, stock beam. the lower ball joint is pretty much inside the wheel and ALMOST touching it. I have 195/65/15 but i already know i have to change those out. But do these come in different offsets? they are the empi 2 Liters. How do i get them away from the lower ball joint? and what size tire should I run? |
|
Back to top |
|
|
|