Author |
Message |
the joker Samba Member
Joined: October 12, 2006 Posts: 1287
|
Posted: Sat Jul 30, 2016 10:10 am Post subject: T-25 Joker in US oddball part needed// futile search so far |
|
|
Mod please don't lock me
search the web/parts/ swaps / forums etc.
bunch of wanted ad's on here
long story short nonexport 84 joker camper 2.1 rebuild w/single sol pic 5
need the bellow between the air cleaner carb
mines cracking and is going to fail soon looks like PO spray sealer? on it plastic coat???? something
need to find one ASAP will pay international what ever
may take it off and find the part # hate to mess with it in it's current state |
|
Back to top |
|
|
Steve M. Samba Member
Joined: July 30, 2013 Posts: 6798 Location: Fort Lauderdale, Fl.
|
Posted: Sat Jul 30, 2016 10:23 am Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
pictures! |
|
Back to top |
|
|
the joker Samba Member
Joined: October 12, 2006 Posts: 1287
|
Posted: Sat Jul 30, 2016 11:22 am Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
always have trouble with pics out of this laptop
but it's short slite s curve 1 foot long 2'' dia ?
bellows between carb hard bolt down top & air cleaner housing
2 larger band clamps wrap it all up |
|
Back to top |
|
|
0to60in6min Samba Member
Joined: November 27, 2006 Posts: 3414 Location: OR & CA (Oregon/California)
|
|
Back to top |
|
|
the joker Samba Member
Joined: October 12, 2006 Posts: 1287
|
Posted: Sat Jul 30, 2016 2:19 pm Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
if it could have been that easy not try to put a pic up[img][/img] |
|
Back to top |
|
|
the joker Samba Member
Joined: October 12, 2006 Posts: 1287
|
Posted: Sat Jul 30, 2016 2:24 pm Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
hate computers loaded pic in gallery t-25 carb part can't get it up on the forum thread |
|
Back to top |
|
|
Ahwahnee Samba Member
Joined: June 05, 2010 Posts: 9776 Location: Mt Lemmon, AZ
|
Posted: Sat Jul 30, 2016 3:14 pm Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
FIFY
|
|
Back to top |
|
|
danfromsyr Samba Member
Joined: March 01, 2004 Posts: 15129 Location: Syracuse, NY
|
Posted: Sat Jul 30, 2016 3:20 pm Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
if that is the same size (or not) on each end it looks like a good place for Silicone hose. upgrade and be one & done with it.
http://www.siliconeintakes.com/silicone-hose/
buy black silicone if you don't want a 'tuner' look in the compartment. _________________
Abscate wrote: |
These are the reasons we have words like “wanker” |
|
|
Back to top |
|
|
the joker Samba Member
Joined: October 12, 2006 Posts: 1287
|
Posted: Sat Jul 30, 2016 7:05 pm Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
thank you great pic poster and I'll chk in the am about the sizes I think there the same that would solve the problem Thanks |
|
Back to top |
|
|
Steve M. Samba Member
Joined: July 30, 2013 Posts: 6798 Location: Fort Lauderdale, Fl.
|
Posted: Sat Jul 30, 2016 10:18 pm Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
Yes, this is just a straight hose, you do not need the same VW part, all you have to do is match the diameter. Silicone is a nice hose to have for this, but if you cannot find it then any hose will work for this.
If you are near a boat chandler like West Marine or Boat Owners Warehouse they do stock silicone hose for marine exhausts and you should be able to find one in this size. |
|
Back to top |
|
|
scottbott Samba Member
Joined: June 02, 2010 Posts: 83 Location: essex,uk
|
Posted: Sun Jul 31, 2016 9:19 am Post subject: Re: T-25 Joker in US oddball part needed// futile search so far |
|
|
try looking for a silicon 'hump' hose the same internal diameter,that worked for me,I have a blos carb hanging off the other end of it no problem |
|
Back to top |
|
|
|