Author |
Message |
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13955 Location: Southampton U.K.
|
Posted: Tue Aug 16, 2016 12:00 am Post subject: 3D Expertise for KG Projects |
|
|
We all know the Karmann Ghia didn't sell in such vast numbers as Beetle and Bus so although the KG survivors are well served with the parts it shared with the Beetle and Bus there are short-run and one year only KG parts that will never be commercially viable for reproduction by the major suppliers.
If short-run parts are made it’s usually by the enthusiastic amateur and although there is a history of fine parts being made, sometimes the funding and handling of orders falls short of professional standards. Sadly one has to accept the risks when dealing with the hobbyist supplier…it doesn’t often go wrong but when it does it’s usually because the product is good and the demand outstrips the amateur's capacity to keep up.
In recent years short-run small items have been made using the home 3D printer but now that the supply of OEM style Karmann Ghia mats has dried up and resurrecting the previous outlet looks more difficult than raising the Titanic, we need to turn our attention to the larger items.
Yes the thorny subject of Karmann Ghia Mats sets should be the first project.
My impression…from my scant knowledge of 3D printing…is that home production of this item is beyond the scope of the home printer. What we need are professional people who can scan and produce a quality product. So this is where you chip-in. We want to hear from you about your knowledge and expertise on this subject. _________________ John.
Judson Supercharger Information on The Samba
My 1958 Shorrock Supercharged Karmann Ghia
Stop dead photo links! Post your photos to The Samba Gallery! |
|
Back to top |
|
|
rcooled Samba Member
Joined: September 20, 2008 Posts: 2506 Location: Santa Cruz, CA
|
Posted: Tue Aug 16, 2016 5:01 pm Post subject: Re: 3D Expertise for KG Projects |
|
|
3D printing probably isn't the right choice for making floor mats. This technology is best suited to making three-dimensional parts (like dash knobs, for example) out of rigid materials like ABS plastic rather than wide, thin parts of flexible rubber-like material. Many 3D printed parts that require a cosmetically smooth surface also need post-production finishing which will increase the piece-part cost. It would also take a fairly large, rather expensive printer to make something with the footprint of a Ghia floor mat.
While we're on the subject, I created a SolidWorks CAD model of this cable clip for my Ghia and will gladly supply the STL file (used by the 3D printer) to anyone who might need it. This is one of three clips that hold the engine lid release cable in place inside the engine bay. I believe it's a one-year-only item used only in '67.
The reproduction part is on the right...the other two are originals.
_________________ '63 Ragtop (current)
'65 Ghia coupe (totaled)
'67 Ghia convertible (current)
'69.5 Ghia convertible and
'62, '63, '65, '69 Bugs (all long gone)
Last edited by rcooled on Tue Aug 16, 2016 9:26 pm; edited 2 times in total |
|
Back to top |
|
|
c21darrel Samba Member
Joined: January 22, 2009 Posts: 8211 Location: San Dimas
|
|
Back to top |
|
|
|