Author |
Message |
cln60ragfk Samba Member
Joined: June 21, 2005 Posts: 1569 Location: Colorado
|
Posted: Sun Aug 07, 2016 1:45 pm Post subject: Dehne gauge cable |
|
|
Curious to see if anyone extends dehne gauge cables? I got a restored gauge and sending unit in a trade, and after setting everything up, the cable is about 2-3 inches to short to connect to the sending unit
Any help would be awesome
Justin _________________ FOLKS |
|
Back to top |
|
|
cln60ragfk Samba Member
Joined: June 21, 2005 Posts: 1569 Location: Colorado
|
Posted: Sun Aug 07, 2016 2:25 pm Post subject: Re: Dehne gauge cable |
|
|
_________________ FOLKS |
|
Back to top |
|
|
hitest Samba Member
Joined: September 30, 2008 Posts: 10296 Location: Prime Meridian, ID
|
Posted: Tue Aug 16, 2016 10:56 pm Post subject: Re: Dehne gauge cable |
|
|
A million years ago I had a dehne gauge in a '60 vert- but with the different tank it reached just fine. I recall it reminded me more of a bicycle-type jacket than the GHE ones from later year cars. Perhaps the oldest bike shop in your town could help? I'm guessing cabling from a variety of 50-60s era bikes would come closer than anything in the universal 70s-up years. _________________
EverettB wrote: |
I wonder what the nut looks like.
|
'62 L390 151, '62 L469 117, '63 L380 113, '64 L87 311, '65 L512 265, '65 L31 SO-42, '66 L360 251, '68 L30k 141, '71 L12 113, '74 ORG 181
FU#5 |
|
Back to top |
|
|
jack1448 Samba Member
Joined: October 27, 2012 Posts: 272 Location: Northern NJ
|
Posted: Thu Aug 25, 2016 5:19 pm Post subject: Re: Dehne gauge cable |
|
|
I have a Dehne gauge for the 58-60 models. The cable measures 40 inches - that is from the ball that connects to the sender to the metal barrel right behind the gauge. I tried to get a photo, but the light wasn't very good. Will see if I can get a better picture over the weekend. |
|
Back to top |
|
|
jack1448 Samba Member
Joined: October 27, 2012 Posts: 272 Location: Northern NJ
|
Posted: Mon Sep 05, 2016 12:55 pm Post subject: Re: Dehne gauge cable |
|
|
jack1448 wrote: |
Will see if I can get a better picture over the weekend. |
Sorry for the delay. My sender and cable is quite a bit different from yours, here is my sender unit:
and cable:
the end of the cable that attaches to the sender has ball clasp, rather than barrel clasp shown in your picture.
More pictures are posted in the accessory sticky at top of this page.
I agree with hitest that a bike shop might be able to help you. |
|
Back to top |
|
|
|