Author |
Message |
jesus_chrysler Samba Member
Joined: March 04, 2009 Posts: 425 Location: Wisconsin
|
Posted: Sat Sep 24, 2016 8:18 am Post subject: Clutch comes back too far and lays on the floor |
|
|
I'm putting together a thing that I picked up as a project in pieces. I installed the pedal assembly and adjusted up the clutch cable. The clutch feels nice but the pedal doesn't stop when you release it and lays down on the floor pan. What makes the pedal stop when released? I can't figure this puzzle out. Thanks. _________________ My collection:
58 beetle rag top
63 Single cab
67 11 Window
70 Charger 440
76 Kawasaki H1 triple 2stroke
71 Yamaha R5
06 Chopped HD |
|
Back to top |
|
|
63ziggy Samba Member
Joined: June 19, 2005 Posts: 1100 Location: The Woodlands, Texas
|
Posted: Sat Sep 24, 2016 5:04 pm Post subject: Re: Clutch comes back too far and lays on the floor |
|
|
sounds like missing the pedal stop bracket. It bolts to the pan just behind the pedal assembly. |
|
Back to top |
|
|
jesus_chrysler Samba Member
Joined: March 04, 2009 Posts: 425 Location: Wisconsin
|
Posted: Sat Sep 24, 2016 5:16 pm Post subject: Re: Clutch comes back too far and lays on the floor |
|
|
Does it bolt inside the tunnel? _________________ My collection:
58 beetle rag top
63 Single cab
67 11 Window
70 Charger 440
76 Kawasaki H1 triple 2stroke
71 Yamaha R5
06 Chopped HD |
|
Back to top |
|
|
63ziggy Samba Member
Joined: June 19, 2005 Posts: 1100 Location: The Woodlands, Texas
|
Posted: Sat Sep 24, 2016 5:22 pm Post subject: Re: Clutch comes back too far and lays on the floor |
|
|
sorry i do not have a readily available pic. i will look. it bolts through the floor pan. just behind/under the clutch brake pedal side of the pedal assembly. opposite of tunnel side. there is a raised bump on the underside of the brake arm that stops when hits pedal stop. |
|
Back to top |
|
|
jesus_chrysler Samba Member
Joined: March 04, 2009 Posts: 425 Location: Wisconsin
|
Posted: Sat Sep 24, 2016 5:30 pm Post subject: Re: Clutch comes back too far and lays on the floor |
|
|
That's cool anything helps. I'm not sure what the deal is. I installed new floors so I'm starting fresh. _________________ My collection:
58 beetle rag top
63 Single cab
67 11 Window
70 Charger 440
76 Kawasaki H1 triple 2stroke
71 Yamaha R5
06 Chopped HD |
|
Back to top |
|
|
63ziggy Samba Member
Joined: June 19, 2005 Posts: 1100 Location: The Woodlands, Texas
|
Posted: Sat Sep 24, 2016 5:32 pm Post subject: Re: Clutch comes back too far and lays on the floor |
|
|
here you go, hope helps
|
|
Back to top |
|
|
63ziggy Samba Member
Joined: June 19, 2005 Posts: 1100 Location: The Woodlands, Texas
|
Posted: Sat Sep 24, 2016 5:34 pm Post subject: Re: Clutch comes back too far and lays on the floor |
|
|
should be a dimple in pan hat would needto be drilled and where nut/nut plate should be welded on bottom side depending pan manufacturer. hopefully you have old pan section for reference |
|
Back to top |
|
|
jesus_chrysler Samba Member
Joined: March 04, 2009 Posts: 425 Location: Wisconsin
|
Posted: Sat Sep 24, 2016 6:39 pm Post subject: Re: Clutch comes back too far and lays on the floor |
|
|
That helps very much. Thank you. _________________ My collection:
58 beetle rag top
63 Single cab
67 11 Window
70 Charger 440
76 Kawasaki H1 triple 2stroke
71 Yamaha R5
06 Chopped HD |
|
Back to top |
|
|
EDragnDean Samba Member
Joined: July 13, 2005 Posts: 1148 Location: Vancouver, WA
|
|
Back to top |
|
|
|