Author |
Message |
Bevman Samba Member
Joined: May 24, 2016 Posts: 17 Location: Napa Valley
|
Posted: Wed Oct 26, 2016 11:38 am Post subject: Turn signal cancel not working |
|
|
I put in a new (German) turn signal switch/arm AND a new cancel ring. Wheel is on straight. All work as should except doesn't self-cancel when wheel returns to center. What could be the trouble? Thanks in advance. |
|
Back to top |
|
|
stale air Samba Member
Joined: August 23, 2007 Posts: 5155 Location: Senoia Ga, formally NorCal
|
Posted: Wed Oct 26, 2016 11:52 am Post subject: Re: Turn signal cancel not working |
|
|
Bevman wrote: |
I put in a new (German) turn signal switch/arm AND a new cancel ring. Wheel is on straight. All work as should except doesn't self-cancel when wheel returns to center. What could be the trouble? Thanks in advance. |
Is the cancel ring (on the wheel) in the correct location? _________________ WANTED: Henry Veale Santa Rosa plate frames
WANTED: Brittsan Motors Fresno plate frames
WANTED: Any Georgia plate frames
|
|
Back to top |
|
|
KTPhil Samba Member
Joined: April 06, 2006 Posts: 34022 Location: Conejo Valley, CA
|
Posted: Wed Oct 26, 2016 2:11 pm Post subject: Re: Turn signal cancel not working |
|
|
Pictures and a little more info about your car will help us diagnose the problem. Those parts changed over the years, and some sellers today claim they are more interchangeable than in reality. Also, make sure the gap from the switch to the wheel hub is correct (2-3mm, if I remember correctly). This is adjustable by loosening the clamping screw on the switch assembly, and sliding it along the column until correct, then retighten. Too big a gap (or the wrong parts) will cause your problem. |
|
Back to top |
|
|
Bevman Samba Member
Joined: May 24, 2016 Posts: 17 Location: Napa Valley
|
Posted: Sun Oct 30, 2016 2:20 pm Post subject: Re: Turn signal cancel not working |
|
|
Gap seems within the tolerance. Can the cancel ring go in the wrong way? Shouldn't the long "flange" be opposite the cancel tabs, so it swings around and touches tabs when the wheel is turned, thereby activating cancel tab?
(1964 Std beetle with stock steering) |
|
Back to top |
|
|
|