Author |
Message |
vwuguy Samba Member
Joined: November 01, 2005 Posts: 1053 Location: southwestern ontario, on and netherlands and bc
|
Posted: Wed Mar 16, 2016 9:29 am Post subject: so23 interior door table dimensions |
|
|
Hi,
I am making an so23 interior cabinet set. Does anyone have the dimensions for the cargo door table and the spice rack
I am also looking for dimensions for the interior cabinets.
specifically though i could really use the dimensions of the cargo door table
thanks erb _________________
|
|
Back to top |
|
|
demon1018 Samba Member
Joined: September 12, 2009 Posts: 930 Location: crystal river, fl
|
Posted: Sat Mar 19, 2016 8:48 am Post subject: Re: so23 interior door table dimensions |
|
|
this is to the outside of the gold trim so the wood is slightly smaller. mine is a 61 and is completely original,paint and all. nothing has been changed. if you need other measurements im glad to send them your way. not sure what the spice rack is? |
|
Back to top |
|
|
zuggbug Samba Member
Joined: June 17, 2008 Posts: 3479 Location: Anderson SC
|
Posted: Sun Mar 20, 2016 8:48 am Post subject: Re: so23 interior door table dimensions |
|
|
Love that bus _________________ SOUTHERN INTEGRITY AIRCOOLERS
58 15 window
56 westy |
|
Back to top |
|
|
vwuguy Samba Member
Joined: November 01, 2005 Posts: 1053 Location: southwestern ontario, on and netherlands and bc
|
Posted: Wed Apr 06, 2016 6:14 am Post subject: Re: so23 interior door table dimensions |
|
|
the cargo door table turned out like this looks really good. If you want one i am making them they fit any split bus. I can include hinges and make you a collapsable table leg too.
top
bottem
front
back
_________________
|
|
Back to top |
|
|
Stocknazi Samba Member
Joined: June 18, 2004 Posts: 5150
|
Posted: Sat Feb 18, 2017 10:55 am Post subject: Re: so23 interior door table dimensions |
|
|
I have a question about this cargo door table support leg pivoting base. Is the aluminum base supposed to swivel on the pin, or should the pin spin where it goes through the leg?
The pin on my leg support is frozen inside the leg pole; not sure if I should attempt to free that up, or if it's supposed to be not spin? _________________ WANTED:
58 Westfalia cabinet knobs (3 needed), roof rack, and (7) privy tent poles (silver painted).
"When the people are afraid of the government, that's tyranny. But when the government is afraid of the people, that's liberty."
"Resistance to tyrants is obedience to God."
Thomas Jefferson |
|
Back to top |
|
|
vwuguy Samba Member
Joined: November 01, 2005 Posts: 1053 Location: southwestern ontario, on and netherlands and bc
|
Posted: Sat Feb 18, 2017 11:03 am Post subject: Re: so23 interior door table dimensions |
|
|
could you please retype image
do you hAVE a picture of your table leg to show me then i could tell you how to fix it. _________________
|
|
Back to top |
|
|
Stocknazi Samba Member
Joined: June 18, 2004 Posts: 5150
|
Posted: Sat Feb 18, 2017 2:52 pm Post subject: Re: so23 interior door table dimensions |
|
|
vwuguy wrote: |
could you please retype image
do you hAVE a picture of your table leg to show me then i could tell you how to fix it. |
Here is a close up of the pivot.
It looks to me like there is a steel spacer in the leg tube and the aluminum rivet goes through the center. Should the steel spacer have some movement in the leg tube. The problem is the leg tube is not centered in the bracket and that does not allow for free movement. _________________ WANTED:
58 Westfalia cabinet knobs (3 needed), roof rack, and (7) privy tent poles (silver painted).
"When the people are afraid of the government, that's tyranny. But when the government is afraid of the people, that's liberty."
"Resistance to tyrants is obedience to God."
Thomas Jefferson |
|
Back to top |
|
|
johny__utah Samba Member
Joined: September 02, 2008 Posts: 426 Location: Arizona/California
|
Posted: Tue Feb 28, 2017 2:36 pm Post subject: Re: so23 interior door table dimensions |
|
|
can you please share/post another measurement.. Top of white panel edge to the top of table in the down position. Also hinge spacing Thank you!! _________________ 1956 L31
1961 L346 L347
1963 L380 L289 |
|
Back to top |
|
|
|