| Author |
Message |
[email protected]
Samba Member
Joined: July 06, 2003
Posts: 3
|
 Posted: Sat Jun 11, 2005 3:54 am Post subject: I Need Advice!!! |
 |
|
How do I bolt in my 72 Type3 brake master cylinder?
Do I bolt it in through from outside into the bulkhead?
Do the bolts go from the inside of the car (behind the brake pedal) out, and then secure the master cylinder on with nuts?
My car manuals are not making it clear!
If anyone has a photo or diagram that would also be good.
Thanks |
|
| Back to top |
|
 |
Russ Wolfe
Samba Member
Joined: October 08, 2004
Posts: 25187
Location: Central Iowa
|
| Posted: Sat Jun 11, 2005 8:16 am Post subject: |
|
|
A type 3 master cylinder bolts on from the outside. Type 1 master cylinders bolt on from the inside.
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey
Gary: OK. Ima poop. |
|
| Back to top |
|
|
|
