| View previous topic :: View next topic |
| Author |
Message |
BILL
Samba Member
Joined: September 10, 2002
Posts: 1
|
 Posted: Tue Sep 10, 2002 10:14 pm Post subject: Lowered rear end on my 56 oval |
 |
|
I just lowered the front end of the car.
It came out really nice,now i need some technical advise,if anyone lives in the san diego area,that would like to help on this project let me know..i have lots of free time,garage.tools ,beer and more beer.thanxs |
|
| Back to top |
|
 |
[email protected]
Samba Member
Joined: September 10, 2002
Posts: 14
|
| Posted: Wed Sep 11, 2002 10:04 am Post subject: Lowered rear end on my 56 oval |
|
|
| I would be glad to help. Can you send me a airline ticket from Seattle. Ill bring the beer. I hear they dont know how to make it down there. |
|
| Back to top |
|
|
RareAir
Samba Member
Joined: May 11, 2002
Posts: 12604
Location: 18 miles North of the border
|
| Posted: Thu Sep 12, 2002 9:51 pm Post subject: Lowered rear end on my 56 oval |
|
|
| Hey Bill, I'm in the San Diego area abnd am always looking for more VW enthusiasts. I'm near Qualcomm Stadium so email me at: [email protected] and I'll be more than happy to help/point you in the right direction. |
|
| Back to top |
|
|
[email protected]
Samba Member
Joined: September 14, 2002
Posts: 9
|
| Posted: Tue Sep 17, 2002 9:55 am Post subject: Lowered rear end on my 56 oval |
|
|
| Sure, lower the rear end so the oil in the trans will run uphill through the axle tubes to lubricate the wheel bearings. Ever seen ANY fluid run uphill? Ever purchased rear wheel bearings? - Mot cheap nor easy to change. Support your local parts house - -. |
|
| Back to top |
|
|
Trayle D. the real oggfk
Samba Fabricator
Joined: March 24, 2002
Posts: 1508
Location: Phoenix...... GFK all day every day
|
| Posted: Wed Sep 18, 2002 1:15 am Post subject: Lowered rear end on my 56 oval |
|
|
| Actually there is such a thing as sealed rear axle bearings. You can get them from kammen(sp?). Then you dont have to worry about that. But then I run lowered cars all the time and rarely have I had problems with stock bearings. If you are worried about the oil running up hill...You can periodicly just raise the rear end. |
|
| Back to top |
|
|
|
