Notchback doors.

Nevada Notch · Posted: Sun Jul 24, 2005 11:18 pm Post subject: Notchback doors.

Can anybody out there tell me if doors from a squareback or fasty fit on a 64 notch?

sofaking · Posted: Mon Jul 25, 2005 5:06 am Post subject:

Depends on the hinges, if it is a 3 bolt hinge or a 4 bolt. otherwise they will fit.

Nevada Notch · Posted: Mon Jul 25, 2005 3:29 pm Post subject:

What do you mean by either three or four bolt? My drivers door is a three bolt hinged door bolted to my 4 bolt hole configuration 64 body. One of the bolt holes in the bottom hinge does not line up with the body and there is no way to put a bolt in it. My passenger side door is the proper four bolt hinge patern. Any idea which cars or years the hinge changes were made? Are you saying that the overall shape and size of the doors is the same and that there are only variances in the hinge bolt patern? I know next to nothing about type 3's so any help is greatly appreciated!

sofaking · Posted: Mon Jul 25, 2005 5:06 pm Post subject:

Yes, and it sounds like you need a 4 bolt for the driver side. And I'm not sure but I belive that all of 64 is a 3 bolt, my car is.

tomnotch · Posted: Mon Jul 25, 2005 5:28 pm Post subject:

4 bolt? like 4 bolts between 2 hinges? I that is the logic, then all notches have 6 bolt doors.

This subject is about a "once a month'er". Try a search as I think I have laid this out a couple of times.
_________________
Tom

DVKK

DSD, Dark Side Disciples
Progenitor


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Type 3	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1