| Author |
Message |
Nessal
Samba Member
Joined: May 08, 2005
Posts: 345
Location: CA Bay Area
|
 Posted: Thu May 12, 2005 8:50 pm Post subject: Is this the proper sequence for painting? |
 |
|
Let's say you sanded down to bare metal...
Fix lows and highs and use filler
Sand then clean
Spray on etch primer
Sand then clean
Spray on primer sealer
Sand then clean
Spray on base coat
Let it flash
Spray on clear coat
If you are using a single stage, just spray on after primer sealer. Is this correct? |
|
| Back to top |
|
 |
BIG MAC
Samba Member
Joined: August 28, 2003
Posts: 105
Location: Hemet, Ca
|
| Posted: Fri May 13, 2005 8:38 pm Post subject: |
|
|
| Sounds like you have the basic jist of it. The one thing that I see being omitted is applying a primer surfacer after etching. This is the step where you will be doing alot of the tedious block sanding. After your car is straight then apply sealer and paint. |
|
| Back to top |
|
|
|
