torque settings

aussie01 · Posted: Fri Aug 19, 2005 9:51 pm Post subject: torque settings

I need to tighten the nut on my front pulley, in the Bentley it says 94-108 ft.lb. Now the torque wrench I borrowed from my neighbor is inch pounds. Is it as simple a conversion as X 12???? If so, my wrench only goes up to 750.

EverettB · Posted: Fri Aug 19, 2005 9:57 pm Post subject:

Yes, multiply by 12.
_________________
How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery!

Russ Wolfe · Posted: Fri Aug 19, 2005 10:07 pm Post subject:

You will need a bigger torque wrench.
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey

Gary: OK. Ima poop.

EverettB · Posted: Fri Aug 19, 2005 10:10 pm Post subject:

I use my 1/2" drive torque wrench for that range.
_________________
How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery!

aussie01 · Posted: Fri Aug 19, 2005 10:15 pm Post subject:

Russ Wolfe · Posted: Fri Aug 19, 2005 10:22 pm Post subject:

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=239
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey

Gary: OK. Ima poop.

EverettB · Posted: Fri Aug 19, 2005 10:31 pm Post subject:

OMG, that is cheap.
_________________
How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery!

Russ Wolfe · Posted: Sat Aug 20, 2005 7:17 am Post subject:

FASTBACKDON · Posted: Sat Aug 20, 2005 7:38 am Post subject:

everett that is normal from harbor freight do you have one near you?
_________________
FUCK CANCER FUCK CANCER FUCK CANCER!!
Mom 25 months of standing up to Cancer R.I.P I miss you so much.

Buy my best friends stuff
http://www.thesamba.com/vw/classifieds/search.php?username=56TIMOTEO

(21:10:42) Jennepher: Russell is our proudest achievment. I feel like Samba created him from a little nugget of crap into a full blown adult.

EverettB · Posted: Sat Aug 20, 2005 9:13 am Post subject:

There is one across town.

I bought some supplies there before - sandpaper, etc..
Most of their tools looked very scary to me but I can see buying something you only need to use a few times (before it breaks anyway).
_________________
How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery!

Russ Wolfe · Posted: Sat Aug 20, 2005 9:24 am Post subject:

Their wrenches and stuff are a little cheesy, but you don't feel bad when you have to heat one and bend it to make a special tool.
Also, you don't have to take it back when it breaks. At the price of gas now days, just buy 2 sets to start with. Laughing

_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey

Gary: OK. Ima poop.

Tvättbjörn · Posted: Sat Aug 20, 2005 9:25 pm Post subject:

i´m using harbor freight die-grinder since 4 years. I paid $10 for a small one and a little bit more for the bigger size when they were on sale. So far they still work and nobody steals them at work too Laughing


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Type 3	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1