Author |
Message |
tami Samba Member
Joined: January 21, 2006 Posts: 8 Location: finland
|
Posted: Mon Sep 18, 2006 6:25 am Post subject: stock cam with 1,4 rockers |
|
|
anybody has tried that combo.i have 88 forged mahles and sport muffler in stock 1.6 engine and wondering if rockers and 40 webers will give a little more hp.has somebody tried that combo or is it waste of money?thanks |
|
Back to top |
|
|
Vayabroder Samba Member
Joined: April 04, 2006 Posts: 989 Location: Hollywood, FL
|
Posted: Mon Sep 18, 2006 6:56 am Post subject: Rockers |
|
|
You can use them without risks on a stock cam but to really get some benefit you need to get some head porting done. |
|
Back to top |
|
|
Multi69s Samba Member
Joined: January 24, 2006 Posts: 5364 Location: Lefty, CA
|
Posted: Wed Sep 20, 2006 9:30 am Post subject: |
|
|
Both my dad and myself are running stock cams and 1:1.4 rockers in our 2010s. We are also running dual weber 44s. He is running a baja bug and mine is in my street bug. It is a very smooth conbination, it will give you more power then a stock cam alone, but it is not a high RPM setup. Drivability is similar to a stock cam, but with more horsepower across the powerband. You also get excellent fuel milage with this setup. However, don't by cheap rockers, they will fail early and are a pain to setup correctly. _________________ 69 road Bug 2110
73 Squareback - 2L, T4, Automatic W/ AC
Gone, but many fond memories 69 Baja Bug 2010 - 5 Rib Bus Transaxle
Gone but not forgotten 72 Baja Bug 2010
My builds
T4 into Squareback http://www.thesamba.com/vw/forum/viewtopic.php?t=458944&highlight=
Auto Trans Rebuild http://www.thesamba.com/vw/forum/viewtopic.php?t=516066&highlight=
AC in Squareback https://www.thesamba.com/vw/forum/viewtopic.php?t=...highlight= |
|
Back to top |
|
|
67Beetle2017 Samba Member
Joined: August 01, 2006 Posts: 399 Location: Pasadena CA
|
Posted: Wed Sep 20, 2006 9:35 am Post subject: |
|
|
I have also used this combo on my first 1600 many years ago. I first used the stock springs but since the car was able accelerate faster, valve float would set in at around 4000rpm.
I pulled the heads and install some HD singles and ported the heads. As far as valve float, no more problem and the car could be shifted at 5200rpm with regularity.
X2 do not use cheap rockers. I was using old autocraft rockers at the time. |
|
Back to top |
|
|
|