Thing Hard Top Supports

1hotrodtruck · Samba Member Joined: May 21, 2006 Posts: 15

I am missing the support braces for my hard top. I am talking about the braces that attach to the "B" pillar and the center of the top. It
does not appear to be too difficult to make a pair if someone would be so kind as to make a sketch of these and email it to me.
Thanks in advance.

Woreign · Posted: Thu Nov 23, 2006 9:44 am Post subject:

Here's what the supports look like:

Image may have been reduced in size. Click image to view fullscreen.

They are approximately 22.5" long. The square mounting plate is welded at an angle.

I hope this helps...

1hotrodtruck · Samba Member Joined: May 21, 2006 Posts: 15

Thanks, the pics help, what is the dia. of the tube?

Woreign · Posted: Thu Nov 23, 2006 9:18 pm Post subject:

1 - 3/16"

Ferretkona · Posted: Thu Nov 23, 2006 9:22 pm Post subject:

They would be easy to copy with some EMT conduit. Easy to flatten and weld.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Thing/Type 181	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1