I've got three different screws holding my dashpanels on

[FreakCitySF]

I'm looking for the correct one. Anyone have a picture of a dashpanel screw?

[Woreign]

I have two phillips head screws holding the center dash and a flat head screw in each side dash piece.

[kubelmann]

I have a collection of these original dash panel screws because I have replaced all mine with new stainless steel screws of the same size as the original screws. I did this becasue so many are always missing.

They are a domed headed, phillips, screw that is 3.5 x 16 mm The parts number (worthless) is N 014 087 That is TUV screw size designation. you can buy these screws at Home Depot or Ace Hardware for less than $0.25 each...
You can also get them from those Cool English guys who put the Stainless Steel Thing hardware kits together.

[74 Cosa]

I also replaced my painted screws with new stainless Phillips from ACE Hardware. Looks real good.

[74 Thing]

I did the stainless screw thing on all of the visor screws, dash screws, door handle screws-looks much cleaner.

[kubelmann]

I also replace all my body screws,bolts and washers with stainless steel. Most have female allen head. A great prep for any resto. I bought msot fo the stuff from the guys who sell the Thing hardware kits wo are from England. Very nice folks...