Author |
Message |
storm4710 Samba Member
Joined: September 05, 2007 Posts: 2 Location: denmark
|
Posted: Wed Sep 05, 2007 10:58 am Post subject: spacers for 4x130 to 5x112 |
|
|
deos anyone know where i can get spacers that change from 4x130 to 5x112 (mercedes) with 1 inch widening
because i have a set of nice mercedes rims i want to use in the sommer time,
then at winter time my 4x130 steel rims would be on my vw1302
i drive my beetle all year round
sorry if itīs postet ind the wrong forum |
|
Back to top |
|
|
jody714 Samba Member
Joined: January 07, 2006 Posts: 826 Location: Goose Creek, S.C.
|
Posted: Thu Sep 06, 2007 5:35 pm Post subject: |
|
|
If this is what I wanted to do I'd get new drums or disc's and have blank ones drilled for that bolt pattern. There is a lot of dealers that will do this for you. Rick Oliver at VWsplace for one. I get rear disc brake kits from him for the trikes I build in a Chevy bolt pattern. I don't like adapters and sometimes they can cost more than new drums/discs done your way. Just another way to do it.
Jody |
|
Back to top |
|
|
P.Stratton Samba Member
Joined: August 31, 2003 Posts: 115 Location: Street, MD
|
Posted: Wed Feb 13, 2008 5:50 pm Post subject: |
|
|
were is vwsplace? _________________ Always looking for a good opportunity !!!
'73 Bus
'67 Beetle |
|
Back to top |
|
|
jody714 Samba Member
Joined: January 07, 2006 Posts: 826 Location: Goose Creek, S.C.
|
Posted: Wed Feb 13, 2008 6:22 pm Post subject: |
|
|
http://vwsparts.com/m_17.asp?pa=m_17
Here's the link. He's in Kansas, just tell him Jody from Goose Creek, SC sent ya. Just tell him the bolt pattern you want and what you want it on and he should be able to hook you up. Email or call him.
Jody |
|
Back to top |
|
|
P.Stratton Samba Member
Joined: August 31, 2003 Posts: 115 Location: Street, MD
|
Posted: Wed Feb 13, 2008 8:05 pm Post subject: |
|
|
Thanks e-mail sent! _________________ Always looking for a good opportunity !!!
'73 Bus
'67 Beetle |
|
Back to top |
|
|
|